Two Components Low Pressure PU Form Injection Machine
Constituents of PU Form Injection Equipment:Our PU form injection machine is consisted of mixing head, loading tanks, metering pump unit, hot-water circulating system, cleaning installation, base, supporting frame for mixing head, electrical control cabinet and so on.
Two components low-pressure PU form injection machine can make highly-elastic, slowly-elastic, self-skinning, half-rigid, or rigid PU foam products such as seat cushions for vehicle use, pillows, toys, chair arms, steering wheels, dashboards, mirror frames, flower pots, insulating material, soles, burglary proof doors, or fillings of elevator’s door.
Technical Parameters of PU Form Injection Machine:
|
Mixing ratio |
A:B=2.5:1 |
A:B=1:1 |
Or in accordance with technical requirement |
|
Range of throughput (gms/sec) (г/сек) |
7～1000 |
5～1000 |
7 scales in total, see throughput list for details |
|
Volume of loading tank (L) |
40～300 |
40～300 |
40, 120, 150, 220, 300 |
|
Revolution of mixing head (rpm) |
3500-4500 |
3500-4500 |
|
|
Program-controlled points |
12 |
12 |
40 points or 200 points if on request |
|
Viscosity requirement (CPS) |
＜2000 |
＜2000 |
|
|
Temperature adjusting range (℃) |
0-50 |
0-50 |
|
|
Total power (kw) |
9～18 |
9～18 |
6 KW for heating |
|
Form of mixing head assembly Crane or Overhead travelling |
|||
|
External dimensions (m) Length × Width × Height 3.0×1.5×2.3/4.4×1.8×3.0 (for tank of 150 L) |
|||
List of Throughput:
|
Ａ:B=2.5:1 |
A:B=1:1 |
|
(1) 7-30 |
(1) 5-20 |
|
(2) 15-60 |
(2) 15-50 |
|
(3) 30-150 |
(3) 30-120 |
|
(4) 60-250 |
(4) 50-200 |
|
(5) 120-400 |
(5) 80-300 |
|
(6) 180-600 |
(6) 120-500 |
|
(7) 500-1000 |
(7) 400-1000 |
在线联系供应商
Other supplier products
 |
Cold storage panel line | The line can make PU cam lock panel, its standard width is 960mm and the length in the common is less than 6.5m. It can make small cold room, pan... |
 |
PU Sandwich Panel Line | PU Sandwich Panel Line Delivery and Payment:Our production cycle of the product is 6 months. 30% deposit payment, 65% before delivery, 5% of the... |
 |
Large Flow Rate Low Pressure Polyurethane Injection Machine | Introduction:This large flow rate low-pressure polyurethane injection machine developed on our own is a kind of low-pressure injection equipment ... |
 |
Three Components Low Pressure Polyfoam Injection Machine | Introduction of polyfoam injection machine: This three components low-pressure polyfoam injection machine is especially suitable for manufactur... |
 |
PU Sandwich Door Production Line | Introduction of PU sandwich door production line: The PU sandwich door production line is used to produce sandwich panels for making automatic d... |
Same products
 |
STAINLESS STEEL SPIRAL WELDED PIPE PRODUCTION LINE | 卖方: Hebei tianxianghao metallurgical equipment manufacturing co.,ltd | The stainless steel spiral welded pipeunit adopts front-swing intermittent production, which is a... |
 |
螺旋洗石机 | 卖方: 爱迪机械制造有限公司 | 产品特点：螺旋洗石机是砂洗机的一种，又分为单螺杆洗石机和双螺杆洗石器。砂砾石材料中的土壤和水混合的目的是从设备上的出口排出，而砂砾石材料在螺旋装置的作用下从顶部的排放口排出，从而实现砂砾石材料的... |
 |
Push Ball Valve | 卖方: Zhejiang Carbo Bronze Co., LTD | Because the push to connect flanged bronze ball valve is designed and manufactured with a push ro... |
 |
滚筒筛振动筛水泥浆高频筛分机 | 卖方: 爱迪机械制造有限公司 | 产品特点：1.结构简单，维修量小，投资少，振动小，噪音小。2.物料按近似圆形运动轨迹前进，物料分散快，进料均匀，筛分效率高。3.轴承采用机油润滑，使用寿命长。4.便于与其他设备配套，提高自动化程... |
 |
单缸液压圆锥机 | 卖方: 爱迪机械制造有限公司 | 产品特点：1.应用范围广：可破碎坚硬岩石，同一宿主通过更换衬板可获得多种空腔类型，适应各种应用。中碎型有一个稳定且大的进料口，用于物料的中碎（甚至粗碎）。2.该产品具有良好的颗粒形状。优化组合破... |
