Two Components Low Pressure PU Form Injection Machine
Constituents of PU Form Injection Equipment:Our PU form injection machine is consisted of mixing head, loading tanks, metering pump unit, hot-water circulating system, cleaning installation, base, supporting frame for mixing head, electrical control cabinet and so on.
Two components low-pressure PU form injection machine can make highly-elastic, slowly-elastic, self-skinning, half-rigid, or rigid PU foam products such as seat cushions for vehicle use, pillows, toys, chair arms, steering wheels, dashboards, mirror frames, flower pots, insulating material, soles, burglary proof doors, or fillings of elevator’s door.
Technical Parameters of PU Form Injection Machine:
|
Mixing ratio |
A:B=2.5:1 |
A:B=1:1 |
Or in accordance with technical requirement |
|
Range of throughput (gms/sec) (г/сек) |
7～1000 |
5～1000 |
7 scales in total, see throughput list for details |
|
Volume of loading tank (L) |
40～300 |
40～300 |
40, 120, 150, 220, 300 |
|
Revolution of mixing head (rpm) |
3500-4500 |
3500-4500 |
|
|
Program-controlled points |
12 |
12 |
40 points or 200 points if on request |
|
Viscosity requirement (CPS) |
＜2000 |
＜2000 |
|
|
Temperature adjusting range (℃) |
0-50 |
0-50 |
|
|
Total power (kw) |
9～18 |
9～18 |
6 KW for heating |
|
Form of mixing head assembly Crane or Overhead travelling |
|||
|
External dimensions (m) Length × Width × Height 3.0×1.5×2.3/4.4×1.8×3.0 (for tank of 150 L) |
|||
List of Throughput:
|
Ａ:B=2.5:1 |
A:B=1:1 |
|
(1) 7-30 |
(1) 5-20 |
|
(2) 15-60 |
(2) 15-50 |
|
(3) 30-150 |
(3) 30-120 |
|
(4) 60-250 |
(4) 50-200 |
|
(5) 120-400 |
(5) 80-300 |
|
(6) 180-600 |
(6) 120-500 |
|
(7) 500-1000 |
(7) 400-1000 |
Send product request
Other supplier products
 |
Three Components Low Pressure Polyfoam Injection Machine | Introduction of polyfoam injection machine: This three components low-pressure polyfoam injection machine is especially suitable for manufactur... |
 |
Normal Temperature Elastomer Polyether Injection Machine | Technical Parameters of Normal-Temperature Type Elastomer Polyether Injection Machine: Mixing Ratio Material A: Material B =100:90 ... |
 |
Color Steel Sandwich Panel Production Line | Introduction of color steel sandwich panel production line: The continuous production line for rigid polyfoam laminated panel with color steel f... |
 |
Polyurethane Foaming Equipment | Polyurethane Foaming Equipment Description:The polyurethane foaming equipments include flat top polyurethane foaming production line and box typ... |
 |
Flame Lamination Machine | Introduction:The advent of flame lamination machine is demanded by further-processing requirement of textile. Nowadays the development of cap-mak... |
Same products
 |
Chinese Auto Tube Cutting Machine GT-ACT29 | Seller: Zhaoqing City Greater Technology Co., Ltd | Auto tube cutting machine use to cut tubes for heating elements automatically. Mainly for heater ... |
 |
Anti-corrosion SSAW Steel Pipe | Seller: HEBEI TIRICO PIPELINE CO.,LTD | Anti-corrosion SSAW Steel Pipe Anti-corrosion steel pipes are used in petroleum, chemical, gas, ... |
 |
1435mm Digital Track Gauge with Bluetooth Use in Railway | Seller: Wuhan Liankeliji Rail Equipment Co., Ltd | The railway digitaltrack gaugeis mainly used for the measurement of railway track gauge, superele... |
 |
NE-1525 Featuring Automatic Reset Battery Hydraulic Pipe Plumbing Tool | Seller: Zhejiang Huaqi Information Technology Co., LTD | ● The automatic reset battery hydraulic pipe crimping tool is an industry- solution designed for ... |
 |
DC series high efficiency european jaw crusher | Seller: Shanghai Dongmeng Road and Bridge Machinery Co., Ltd. | Jaw crusher is widely used in ore crushing, construction aggregate production, construction waste... |
