Spiral Welded Pipe Mills
DescriptionThis series of welded tube mill machine is used to produce the low-pressure transporting pipe and structure pipes. The spiral welded pipe mill is equipped with a whole spiral welded pipe line and necessary finishing equipment.Material:hot roll or slitting cut steel coil
Specifications of the Welded Tube Mill Machine
Coil OD |
Φ1500-2000mm |
ID |
Φ610-760mm |
900-2000mm |
|
Thickness |
6-25.4mm |
Material |
Normal carbon steel,low carbon steel Max yield strength is less than 48kg/mm2480Mpa-X70 API HR Q235, Q345, X42-X70(X70≤19.1,Q235≤25.4mm) |
Side Curvature |
≤10mm/10m |
Tower |
<30mm |
Max Weight |
40T |
Product Parameters:
Pipe Diameter |
Φ400-Φ2500mm (16inch-100inch) |
Thickness |
6-25.4 mm Max yield strength is less than 48kg/mm2-X70 API HR Q235, Q345, X42-X70(X70≤19.1,Q235≤25.4mm |
Helix angle |
45°-78° |
Maxpipe thread pitch |
2400mm |
Length |
8-12m |
Configuration |
One set 40T crane and the other20T crane |
Capacity |
~1600KW(Including the beveller,testers ,welders and so on) |
Parameters and Flow of ProcessParameters
Front Swiveling |
Left Helix |
Forming Form |
Three rollers outside controlled |
Positioning Form |
CenterPosition |
Welding Speed |
|
Feeding Speed |
|
Welding Mode |
double sides submerged arc welding |
Inside Welded Machine Outside Welded Machine |
(2 nozzles) I: DC-1500 ⅡAC-1200(t≥12.7mm) (2 nozzles) I: DC-1500 II: AC-1200(t≥12.7mm) |
Pressure Air |
Working Process of the Spiral Welded Pipe Mill:(coil car) → (uncoil) → (aligning) → (5 roll leveling) → (aligning) → (shearing and cross welding) → (aligning) → (milling) → (aligning) → milling→ (aligning) → (steel plate cleaning) → (driving) → (pre-bending) → forming → (inside welding) → (outside welding) → (cut to length) → (output distributing) → (on-line UT testing) → (welding flux disposing) → (X-ray testing) → (end-facing) → (hydro-static testing) → (collecting&storage)
在线联系供应商
Other supplier products
Seamless Pipe Hydrotester | DescriptionSeamless pipe hydrotester is mainly used to make a pressure test on the seamless pipe. Generally the pressure is 70 Mpa and max pressu... | |
Tube Straightening Machine | DescriptionTube straightening machine is mainly used to straighten metal profiles, rods, tubes and wire rods. It changes the straightness of bar ... | |
End Facing and Beveling Machine | DescriptionFlat head chamfering machine is mainly used for flatting the end of spiral welded pipe and finish the edges. This pipe end beveling ma... | |
Spiral Welded Pipe Mills | DescriptionThis series of welded tube mill machine is used to produce the low-pressure transporting pipe and structure pipes. The spiral welded... | |
Hydrostatic Testing Machine | DescriptionHydrostatic testing machine is one of our main products for steel pipe pressure test and eliminating the internal stress on the pipe. ... |
Same products
STAINLESS STEEL SPIRAL WELDED PIPE PRODUCTION LINE | 卖方: Hebei tianxianghao metallurgical equipment manufacturing co.,ltd | The stainless steel spiral welded pipeunit adopts front-swing intermittent production, which is a... | |
螺旋洗石机 | 卖方: 爱迪机械制造有限公司 | 产品特点:螺旋洗石机是砂洗机的一种,又分为单螺杆洗石机和双螺杆洗石器。砂砾石材料中的土壤和水混合的目的是从设备上的出口排出,而砂砾石材料在螺旋装置的作用下从顶部的排放口排出,从而实现砂砾石材料的... | |
Push Ball Valve | 卖方: Zhejiang Carbo Bronze Co., LTD | Because the push to connect flanged bronze ball valve is designed and manufactured with a push ro... | |
滚筒筛振动筛水泥浆高频筛分机 | 卖方: 爱迪机械制造有限公司 | 产品特点:1.结构简单,维修量小,投资少,振动小,噪音小。2.物料按近似圆形运动轨迹前进,物料分散快,进料均匀,筛分效率高。3.轴承采用机油润滑,使用寿命长。4.便于与其他设备配套,提高自动化程... | |
单缸液压圆锥机 | 卖方: 爱迪机械制造有限公司 | 产品特点:1.应用范围广:可破碎坚硬岩石,同一宿主通过更换衬板可获得多种空腔类型,适应各种应用。中碎型有一个稳定且大的进料口,用于物料的中碎(甚至粗碎)。2.该产品具有良好的颗粒形状。优化组合破... |