ISO30 Tool Holders CNC Collect Chucks for HSD Spindle ATC CNC Routers
ISO30 Toolholders for HSD Spindle ATC CNC Routers
This is a 50mm flange diameter ISO30 toolholder which is commonly used on most common woodworking cnc routers. Such as CNT, Biesse, FMT, DMS, Masterwood, Flexicam, Shop Sabre, Techno, CNT Motion, CR Onsrud, NEW CNC, Northwood, Omnitech, Precix, Quintax, Ritter, Routech, SCM, Shoda, Shopbot, Thermwood, Weeke, Quintax and Chinese CNC Machining Centers.
ISO 30 tool holders features:
Toolholder model: ISO30-ER32-42L
ISO30 tool holder collet size: ER32
Material: 20CrMnTi
Balanced: 30,000rpm, G2.5
Pullstud: HSD
Country of origin: China
Compatibility: Can be used on CNC router machines with HSD spindles.
Precision ground surfaces. Nickel Plated. Anti-rust.
Comes with clamping nut.
These high quality ISO30 Toolholers featured with ER32 collet interface to hold tools with a shank diameter up to 20mm, 3/4". They are precision manufactured in China, and are balanced to 30,000rpm.
ISO30 ER32 42L toolholders are available in stock for quick delivery.
RICO CNC carries the full line of cnc spare parts, including , router spindles, , HSK toolholding system, BT toolings, woodworking machine accessories, etc. If you do not see something you are looking for here, feel free to contact us with your requirements.
Welcome your inquiry!
在线联系供应商
Other supplier products
|
|
ISO30 Tool Holders CNC Collect Chucks for HSD Spindle ATC CNC Routers | ISO30 Toolholders for HSD Spindle ATC CNC Routers This is a 50mm flange diameter ISO30 toolholder which is commonly used on most common woodworkin... |
 |
High Speed HSK63F Tool Holder HSK63F-ER40-80 Cones Woodworking Toolholders | High Speed HSK63F Tool Holder HSK63F-ER40-80 Cones Woodworking Toolholders The HSK F63 high speed tool holders are made for use on precisionand, a... |
 |
SCM Morbidelli CNC Vacuum Pod Sucker for Point to Point CNC Router | SCM Morbidelli CNC Vacuum Pod Sucker for Point to Point CNC Router These CNC vacuum pods and cups are for SCM / Morbidelli CNC routers andGreda Si... |
 |
CNC Router Water Cooled ATC Spindle HSD Spindle Motor for CNC Milling Machines | CNC Router Water Cooled ATC Spindle HSD Spindle Motor for CNC Milling Machines This is the , widely used with CNC routers, CNC milling machine, C... |
 |
BT40 Precision ER Metalworking Toolholding Tool Holders for CNC Milling Machines | BT40 Precision ER Metalworking Toolholding Tool Holders for CNC Milling MachinesThese BT40 tool holders are metalworking toolholding BT holders wit... |
Same products
 |
TCT 锯片 | 卖方: Qingdao jiho machine Co.,ltd | TCT锯片硬度高，耐磨性好，在高温下仍能保持持续切割能力，锯片有多种规格可供选择，满足不同的切割需求，适用于切割各种硬质材料，如钢、铸铁、有色金属等。 |
 |
激光机9060P | 卖方: 济南众木智能科技有限公司 | *工作尺寸：900 * 600mm * RECI W2（80-95W） *步进电机和驱动器 *中国15平方指南 * CW3000冷水机 |
 |
laser machine 6050A | 卖方: 济南众木智能科技有限公司 | *工作尺寸：600 * 500mm * 50瓦 *步进电机和驱动器 * 15方尺 * CW3000冷水机 *排风扇550W *空压机160W * 无线上网 * 220V / 1PH / 50HZ |
 |
laser machine 9060 | 卖方: 济南众木智能科技有限公司 | *工作尺寸：900 * 600毫米 * RECI W2 90瓦 *步进电机和驱动器 * 15个方形导轨 * CW3000冷水机 * 550W排气扇 * 160W空压机 *红点+自动对焦 *刀片+... |
 |
DSP A11 Control System Original Richauto Controller for CNC RouterDSP A11 Control System Original Richauto Controller for CNC Router | 卖方: 苏州瑞科欧机械有限公司 | DSP A11 Control System Original Richauto Controller for CNC Router RichAuto A11E A11S with USB in... |
