10G SFP+ DAC
SFP+ Direct Attach Cables are compliant with the SFF-8431, SFF-8432 and SFF-8472 specifications. Various choices of wire gauge are available from 30 to 24 AWG with various choices of cable length (up to 7m).
Features of10GDirect Attach Cable
Compliant with SFF-8431, 8432 and 8472.
Up to 10.3125Gbps data rate per channel
Up to 7m transmission
Single 3.3V power supply
Temperature Range: 0~ 70 °C
RoHS compliant
Applications of10G SFP+ Direct Attach Cable
Low EMI radiation Switches, servers and routers
Data Center networks
Storage area networks
High performance computing
Telecommunication and wireless infrastructure
Medical diagnostics and networking
Test and measurement equipment
Specifications of 10G SFP+ Direct Attach Cable
General Product Characteristics
High Speed Characteristics
Regulatory Compliance
QSFP+ DAC Specifications |
|
Number of Lanes |
Tx & Rx |
Channel Data Rate |
|
Operating Temperature |
0 to + 70°C |
Storage Temperature |
-40 to + 85°C |
Supply Voltage |
|
Electrical Interface |
38 pins edge connector |
Management Interface |
Serial, I2C |
Recommended Operation Condition of10G SFP+ Direct Attach Cable
Parameter |
Symbol |
Min |
Max |
Unit |
Operating Case Temperature |
Topc |
0 |
70 |
degC |
Storage Temperature |
Tst |
-40 |
85 |
degC |
Relative Humidity (non-condensation) |
RS |
35 |
60 |
% |
Supply Voltage |
VCC3 |
V |
||
Voltage on LVTTL Input |
Vilvttl |
-0.3 |
VCC3 +0.2 |
V |
Power Supply Current |
ICC3 |
- |
15 |
mA |
Total Power Consumption |
Pd |
- |
W |
Notes:
Stress or conditions exceed the above range may cause permanent damage to the device.
This is a stress rating only and functional operation of the device at these or any other conditions above those listed in the operational sections of this specification is not applied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
Pin definition of10G SFP+ Direct Attach Cable
Pin |
Symbol |
Name/Description |
1 |
VEET [1] |
Transmitter Ground |
2 |
Tx_FAULT [2] |
Not used |
3 |
Tx_DIS [3] |
Not used |
4 |
SDA [2] |
2-wire Serial Interface Data Line |
5 |
SCL [2] |
2-wire Serial Interface Clock Line |
6 |
MOD_ABS [4] |
Module Absent. Grounded within the module |
7 |
RS0 [5] |
Not used |
8 |
RX_LOS [2] |
Loss of Signal indication. Logic 0 indicates normal operation |
9 |
RS1 [5] |
Not used |
10 |
VEER [1] |
Receiver Ground |
11 |
VEER [1] |
Receiver Ground |
12 |
RD- |
Receiver Inverted DATA out. AC Coupled |
13 |
RD+ |
Receiver DATA out. AC Coupled |
14 |
VEER [1] |
Receiver Ground |
15 |
VCCR |
Receiver Power Supply |
16 |
VCCT |
Transmitter Power Supply |
17 |
VEET [1] |
Transmitter Ground |
18 |
TD+ |
Transmitter DATA in. AC Coupled |
19 |
TD- |
Transmitter Inverted DATA in. AC Coupled |
20 |
VEET [1] |
Transmitter Ground |
Notes:
Mechanical Dimensions of10G SFP+ Direct Attach Cable
The connector is compatible with the SFF-8432 specification.
Length (m) |
Cable AWG |
1 |
30 |
3 |
30 |
5 |
24 |
7 |
24 |
As anoptic connector supplier, T&S today takes a leading role in OEM and ODM services for optical communication products and fiber optic connectivity solutions. Based on T&S’ excellent and comprehensive capabilities, we are committed to providing optical communication products with superior performance for next-generation communications in a green, pragmatic, and cost-effective manner.
在线联系供应商
Other supplier products
QSFP+ 40G SR4 400M | The 40G QSFP SR4-400m module is a highly integrated 4x10G transceiver focused on reach, bandwidth, density and cost for high port-count 40G systems... | |
FIBER OPTICAL TRANSCEIVERS | As a leading fiber optical transceiver manufacturer, T&SCommunication supplies a full range with all-round categories from 10Gb/s to 100Gb/s op... | |
10G SFP+ AOC | T&S Communication TSPA-85192-xxxC is a Pluggable SFP for 10 Gigabit Ethernet, compliant with the SFF-8431. This transceiver is a high-performan... | |
STANDARD FIBER OPTICAL CERAMIC FERRULE | What is a ceramic ferrule? Ferrule plays a significant role in Fiber Connectors as well as Fiber Patchcord. With the characteristics of low insert... | |
MTP®/MPO Cable Assemblies | MTP/MPO cableassembly use MPO or MTP® multi-fiber connectors. MTP®/MPO Fiber Patch Cordgreatly saves space and is very convenient to use. B... |
Same products
Mechanic Power Max/Ultra Anti-burning Boot Cable For iPhone Android | 卖方: 深圳市维客修科技有限公司 | Mechanic Power Ultra Boot Cable Features:1. Mechanic Power Ultra power cable suitable for Apple i... | |
BAND SEPARATOR WDM DEVICE | 卖方: Sumbexauto | T&S BWDM 3 Ports Device is a kind of FWDM device that can separate C-band and L-band or split... | |
AOC (ACTIVE OPTICAL CABLE) | 卖方: Sumbexauto | AOC is a cabling technology that accepts the same electrical inputs as a direct attach cable, but... | |
40G QSFP+ TO 4SFP+ DAC | 卖方: Sumbexauto | QSFP+ Direct Attach Cables are compliant with the SFF-8436 specifications. SFP+ Direct Attach Cab... | |
40G QSFP+BREAKOUT AOC | 卖方: Sumbexauto | T&S Communication TSQSS-8540G-xxxC is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+S... |