GB/T EV Charger
Charge-Uni AC and DC products comply with the GB/T 18487.1-2015 standard. The AC Charger comes with compact size and simple design, and customers can choose wall-mounted or stand-pillar installation. The DC charger has a power of up to 180 kW, which further reduces charging time and improves overall charging efficiency.
GBT Charging Standard
GB/T 20234.1-2015 stipulates the definition, requirements, test methods and inspection rules of the connecting device for conductive charging of electric vehicles. This standard applies to charging connection devices for conductive charging of electric vehicles, which:
① AC rated voltage not exceeding 690V, frequency 50Hz, rated current not exceeding 250A;
② DC rated voltage not exceeding 1000V, rated current not exceeding 400A. If the power supply interface of the charging connection device uses standardized plugs and sockets in accordance with GB2099.1 and GB1002, this standard does not apply to these plugs and sockets.
GBT ChargerCompatibility
GBT charging piles are suitable for all electric vehicles on the Chinese market. If it is an imported model, a GBT adapter may be required.
GB/T EV Charger Advantages
GB/T AC/DC products have a charging data management function to ensure the integrity and security of the customer's charging data. The product's emergency stop button is designed to cut off the power supply from the power circuit in case of emergency to prevent the failure. CU products are all supported by credit cards, activation mode.
Difference between AC and DC GB/T EV Charger
As the electric system of an EV is a DC system, the AC power is not able to charge the power battery directly during AC charging, it needs to pass through a component called On-board Charger (OBC), which performs AC to DC conversion and is then supplied to the power battery after the voltage is transformed according to the command of the BMS.
In the case of DC charging, the DC pile itself is an AC/DC rectifier and DC/DC transformer, which can be converted from AC to DC directly outside the vehicle according to the needs of the BMS, replacing the role of the on-board charger, hence the DC pile is also known as a non-on-board charger.
GBT EV ChargerCharacteristics
Charging interface is a "nine-hole" design, the picture shows the DC charging gun head. The top middle CC1 and CC2 are used for electrical connection confirmation, while S+ and S- are the communication lines between the off-board charger and the electric vehicle. The two largest holes, DC+ and DC-, are used for charging the battery pack and are high current lines; A+ and A- are connected to the off-board charger and provide low voltage auxiliary power for the electric vehicle, with earth at the very center.
As a professional ev car charger factory, CHARGE-UNI TECHNOLOGY has high-quality ev chargerfor sale. Welcome to contact us if needed.
在线联系供应商
Other supplier products
Type 2 AC Charger | The latest generation of IEC AC charging piles supports charging power of up to 22KW and has an electronic display that dynamically shows charging ... | |
120KW GB/T DC Charger | 120KW GB/T DCLevel 3 Charger The 120kW charging pile is applying streamline design, SOC status display, and clearly showing the charging status. I... | |
EV Charger Wholesale of CHARGE-UNI | In the EV charging industry, CHARGE-UNI has launched the latest generation of vehicle charging piles with years of technical precipitation by an ex... | |
120KW CCS2 DC Charger | The 120KW DC ccs2 chargingpile complies with European standards and is available with both CCS2 and CHADEMO charging plugs. It takes less than an h... | |
7KW GB/T AC Charger | 7KW GB/T AC Charger The 7KW AC wall mounted charger has an ultra-thin design and is able to be easily installed by the user. The user can use Blue... |
Same products
2000W SOLAR INVERTER WITH BATTERY CHARGE | 卖方: Suzhou Cosuper Energy Technology Co., Ltd | The Cosuper InverterLPT2000 integrates the function of battery inverter, battery charger and auto... | |
Type 2 AC Charger | 卖方: Charge Uni Technology Co., Ltd. | The latest generation of IEC AC charging piles supports charging power of up to 22KW and has an e... | |
IEC EV Charger | 卖方: Charge Uni Technology Co., Ltd. | Charger-Union including AC Chargers and DC Chargers. IEC Chargercomply with IEC61851-1 standard, ... | |
GB/T EV DC Charger | 卖方: Charge Uni Technology Co., Ltd. | Charge Uni IEC standard DC charging piles can reach up to 180KW to meet different scenarios; at t... | |
GB/T EV Charger | 卖方: Charge Uni Technology Co., Ltd. | Charge-Uni AC and DC products comply with the GB/T 18487.1-2015 standard. The AC Charger comes wi... |