Type C 3.1 Gen2, 24PIN, right angle, Contacts with DIP and SMT type
With the continued success of the USB interface, there exists a need to adapt USB technology to serve newer computing platforms and devices as they trend toward smaller, thinner and lighter form-factors. This Connector is USB Version 3.1 2nd Gen connectors with one row SMT and one row DIP contacts and through hole shielded tabs. AIKE 10Gbps connectors offer 100VAC rated voltage and up to 3A current rating (VBUS Pins, GND Pins). This USB Gen 2 series is a top mount connector featuring a -30°C to +85°C operating temperature range.
Specifications
|
Type c ConnType |
Type C 3.1 Gen2, 24PIN, right angle, Contacts with DIP and SMT type, through holes legs |
|
Contact No. |
24 |
|
Materials |
For housing can be PBT, LCP, PA6T, PA9T and so onFor shell can be SPCC, Copper and so on.Both are depands on custoer request |
|
Colour |
Blue or Black or Green or Customized Color |
|
Plating |
For Shell, Ni and Tin PlatingFor Contact, Au, Ni, and Tin Plating |
|
Plating Thickness |
For Shell, 50U', 100U' or HigherFor Contact, 1U', 3U'5U' 15U', 30U' or HigherBoth are depands on custoer request |
|
Machenical |
Meet USB C Type Orginazation Standard (attachment Page 5-53) |
|
Electronical |
Meet USB C Type Orginazation Standard (attachment Page 5-53) |
|
Application |
Mainboard, TV, Computer, Rejector, Game machine,smart home and Industrial etc. |
|
Package |
Tray Package or Tape Reel Or Customized Package |
|
Delivery Time |
Usually 25-35 days after receiving the 30% deposit |
|
Payment terms |
TT, L/C, DP or Negotiable |
|
Note |
This part is only one sample for this serious products, we can change the shell, the legs and even housing to make lots of similar parts. We are so able to produce other standard as per the clients' requirements. Just let us know. |
FAQ
Q1: Can we have our logo on the parts?
A1: Yes, we can print customer logo or laser logo as customer wishes.
Q2: Do your parts apply for TID NO.?
A2: Yes, some parts we do, not for all, based on the parts you need we can apply it for you.
Q3: Can you offer the test reports about the parts?
A3: Yes, of course, we can do the test in house and offer reports accordingly.
Q4: Shall we have the drawings?
A4: Yes, drawing is the basic docs that we show the materials and electronics etc.
We are .
在线联系供应商
Other supplier products
 |
USB AM 2.0 to Type C (USB-C) Male Cable(Overmold-Black) | USB AM 2.0 to Type C (USB-C) Male Cable Data Charging Cable,Cable Spec and Length can be Customized, Variety of types outshape, different mouldi... |
 |
DR 25PIN,Male parts,90 degree, Lathe Contact,2 rows,with rivet & screws | D-SUB Series, DR 25PIN 90 Degree, Male part, 2 Rows Lathe Contact, with rivet and screws. Normally this I/O connector used for Industrial Area w... |
 |
HDMI connector 19PIN Side Vertical DIP Type,with through hole legs and plastic with Position post | HDMI 19PIN Female Part, Contact DIP Type, Through Holes Shell Legs,Over PCB Board I/O Connector, The construction with special design to save sp... |
 |
USB Type C 3.1,Receptable 24PIN, double Rows SMT Contacts, through holes legs, SINK PCB board Type | Introduction： With the continued success of the USB interface, there exists a need to adapt USB technology to serve newer computing platforms an... |
 |
USB3.1 Type C (USB-C) Male to Male Data Sync Charging Cable | USB Type CM to Type C (USB-C) Male Cable Data Charging Cable,Cable Spec and Length can be Customized, Variety of types outshape, different moul... |
Same products
 |
MTHD83-919G2B-06A73 Mini HD Female Connector | 卖方: MTCONN ELECTRONICS CO.,LTD | Compared to standard HD interfaces, the Mini HD interfaceis significantly smaller in size. The wi... |
 |
MTBT62-950GW1-12B30 PH0.4mm BTB Female Connector | 卖方: MTCONN ELECTRONICS CO.,LTD | The BTB connectordirectly connects two printed circuit boards (PCBs) through pins, establishing b... |
 |
MTDC48-102AAB-27A18 DC Jack Connector | 卖方: MTCONN ELECTRONICS CO.,LTD | This product is a high-performance DC power socket connector,designed for electronic devices requ... |
 |
MTWF82-108GWN-02A25 8Pin PH0.8mm Wafer Connector | 卖方: MTCONN ELECTRONICS CO.,LTD | This 0.8mm 90° SMT wafer connectorfeatures a high-precision LCP insulator (UL 94V-0 flame-ret... |
 |
26WG11SN 高可靠信号连接器 多电压等级电气连接器 | 卖方: 无锡聚惠利科技发展有限公司 | 26WG11SN 是一款高可靠信号连接器，适用于电子设备、工业系统、通信设备及高性能电气应用中的电路信号连接。该连接器可根据不同接触件排列方式适配不同工作电压等级，适合对信号传输稳定性和电气连接... |
