Auto Fakra Antanna Adapter Cable
Auto Fakra Antanna Adapter Cable
FAKRA Connectorsand Cable Assembliessupport applications that require a high-performing, reliable, and cost-effective RF connector. FAKRA connectors are standard SMB Connectors embedded within a special inter-locking plastic housing that uses multiple color-codes for easy identification and mating, and are designed to perform up to 4GHz at 50 Ω.
MAJOR CHARACTERISTICS
characteristic impedance: 50Ω
Temperature range: -45℃～+85℃
(The lower end of the wiring cable shall prevail)
Design structure and technical parameters:
RF coaxial connector: FAKRA SMB connector
Material:
Inner conductor: Brass,Gold-plated
Insulating medium: PTFE
Outer conductor: Brass, Nickel-plated
Electrical and mechanical properties: characteristic impedance: 50Ω
Frequency range: 0-4GHz
Medium Pressure: 1000V (60s)
Contact Resistance:
Inner conductor≤6mΩ Outer Contact≤1mΩ Insulation Resistance: 1000MΩ V.S.W.R≤1.3 (DC-4GHz)
Insertion loss:≤-15dB(0-4GHz)
Connectors mechanical life: ≥500 cycles
(frequency 12 cycles/MIN)
RF coaxial cable: RG174
Material: Inner conductor: Bare copper (7/φ0.16±0.003mm)
Dielectric: PE(φ1.52±0.05 mm)
Outer conductor:
Bare copper braided wire(80*φ0.10 mm)
Jacket: PVC(φ2.8±0.10 mm)
Physical electrical performance
Min Bent radius: 30mm
Max voltage: 1500 VMS
Temperature scope: -20℃～+80℃
Component overall specification requirements
Appearance:
Connector
Connector surface coating is uniform, no copper exposure, scratch (slight scratch is allowed but the metal under the coating shall not be exposed), oxidation, fracture, insulation deformation and other phenomena.
Cable
The cable is flat, smooth and without damage. No serious scratch is allowed.
Cable assemblies
The surface of the cable assemblyshall be clean, free from dirt and bruises; Welding should be flat, no cracking, copper exposure and other phenomena; Reliable welding.
在线联系供应商
Other supplier products
|
|
Auto Fakra Antanna Adapter Cable | Auto Fakra Antanna Adapter Cable FAKRA Connectorsand Cable Assembliessupport applications that require a high-performing, reliable, and cost-effect... |
 |
SMA Male Crimp Solder Connector for RG58 LMR-195 RG142 Cable | SMA Male Crimp Solder Connector for RG58 LMR-195 RG142 Cable TYPE SMAConnectoris a Kind of shmlink RF coaxial connectorsthat is widely applied, wit... |
 |
RF Coaxial SMB Female Jack Crimp Right Angle Connector for BT3002 Cable | RF Coaxial SMB Female Jack Crimp Right Angle Connector for BT3002 Cable TYPE SMB Products is one Kind of low power miniature RF coaxial Connectorsw... |
 |
2.4mm high frequency male connector can be machined and customized | can be machined and customized The characteristic of High Frequency Connectorsis in small volume、light weight、reliable connection、great vibration... |
 |
2.92 & 2.4 & 3.5 Male Connector High frequency test cable,Direct Solder for .047 Cable, tested to 40 GHz | High frequency test cable,Direct Solder for .047 Cable, tested to 40 GHz When you send the RFQ for RF coaxial cable assemblies, please have below... |
Same products
 |
Connectors | 卖方: O&K GROUP LIMITED | Looking for Quality Products? From electronics to home essentials, fashion to industrial supplie... |
 |
connector | 卖方: O&K GROUP LIMITED | Looking for Quality Products? From electronics to home essentials, fashion to industrial supplie... |
 |
MTHD83-919G2B-06A73 Mini HD Female Connector | 卖方: MTCONN ELECTRONICS CO.,LTD | Compared to standard HD interfaces, the Mini HD interfaceis significantly smaller in size. The wi... |
 |
MTBT62-950GW1-12B30 PH0.4mm BTB Female Connector | 卖方: MTCONN ELECTRONICS CO.,LTD | The BTB connectordirectly connects two printed circuit boards (PCBs) through pins, establishing b... |
 |
MTDC48-102AAB-27A18 DC Jack Connector | 卖方: MTCONN ELECTRONICS CO.,LTD | This product is a high-performance DC power socket connector,designed for electronic devices requ... |
