Board-to-Board Connectors

PCBboard to board connectorsand SMDboard to board connectorsare used to accurately interconnect printed circuit boards (PCBs) in a stackable manner. They can accommodate various types of PCB orientations, relative distances, and space constraints to allow for design flexibility. In addition, multiple materials, plating finishes, and pitches are available to meet electrical and mechanical specifications. Depending on the purpose of the interconnect, connectors are further offered as high-speed, floating, or power. To achieve the desired performance, all the above should be considered when designing an interconnect system.

BoardtoBoard Connector Types

Pin Headers

Pin headers (male) and female headers (socket) are used as a set. A male pin header consists of one or more rows of metal pins molded into a plastic base. Due to their simplicity, male pin headers are the most cost-effective.

Female Headers

Female headers are the sockets that male headers fit into. These connectors complete the design by allowing the PCBs to be easily connected and easily replaced should either of the headers become damaged.

Box Headers

Box header connectors are featured with a plastic shroud around the header. This helps guide the connectors during the mating process to avoid mating errors.

High-Speed Connectors

High-Speed Connectors are specifically designed with robust terminals and high-temperature resistance plastic to be used in industrial applications that require high-speed transmission. The unique contact structure allows it to maintain a steady impedance profile, which ultimately minimizes both the noise and signal loss over the connectivity, with a potential secure data transmission of up to 4Gbps.

What are the orientation options for connectors?

PCB orientation is the relative position of two PCBs to be connected by BTB connectors. Here are some of the common orientations of BTB connectors:

In order to cater various PCB orientations (Parallel, Horizontal, Perpendicular), board-to-board connectors have been developed in straight, right angle and U-shaped designs.

How do we stack PCBs?

Amid the trends of miniaturization, transitioning to light weight and high speed, designers often face many constraints, both mechanically, and electrically. Greenconn offers various solutions to accommodate all stacking options.

Vertical - Parallel, Mezzanine - Both connectors are in a vertical orientation. This allows a PCB to be stacked on top of another, minimizing the surface area as a result.

Horizontal - 180 Degree, Coplanar, Edge-to-Edge - Both connectors are in a horizontal orientation. From the design standpoint, this keeps the mating centerline low profile to the PCBs.

Perpendicular - Motherboard to Daughterboard - Connectors are perpendicular to one another. This is commonly seen in hard drive applications where many "Daughterboards” are stacked onto one motherboard, allowing the data storage space to be efficiently expanded.

Here are some advantages of stacking PCBs: The design can be modularized into smaller PCBs and the PCBs can be connected using BTB connectors later on during assembly. This not only improves the design process but also allows modifications to be made easily.

From the assembly perspective, it can improve the manufacturability of the product, by operating with smaller PCBs rather than one large PCB.

Overall, properly stacking PCBs in layers can enhance the EMC (Electromagnetic Compatibility) of the design.

What are connector pitches?

Connector Pitch is the measurement from the center of one contact to the center of the next contact. When a connector has multiple rows, the pitch in each row and the pitch between rows may be different.

There are numerous factors for the hardware designer to consider when choosing the correct connector pitch:

Space Constraints - The smaller the pitch, the smaller the automotive board to board connectorcan be. In addition, smaller pitch can offer a greater number of contacts within the same space.

Electrical Parameter – Pitch size has a positive correlation to electrical specifications such as current rating and dielectric withstanding.

Other Physical Constraints - Depending on the design, Greenconn offers numerous low-profile connector options across all pitches. We also accept customization requests.

Greenconn’s board to board pcb connectorare available in the following rows:

Rows：

Greenconn offers headers and recepticles in single, double, triple, and quadruple row configurations. Single and dual rows are popular choices, while triple and quadruple rows are offered in a smaller number of pitch and style options.

What are the Connector Contact Materials and Plating?

Base Material

Our connectors typically use a copper alloy as the base material for their contacts (pins). However, different alloy materials offer various levels of conductivity performance and physical endurance.

Here’s a comparison of the common base materials offered at Greenconn:

Brass

Lowest cost

Good strength and spring properties

Good conductor

Phosphor Bronze

High level of strength and conductivity

Superior elasticity

Excellent fatigue resistance

Berylium Copper (Be-Cu)

High level of strength and conductivity

Highly expansive

Plating

Plating affects the connector’s performance, life cycle, quality, and cost.

Plating involves two parts: underplating and finish plating:

Under-plating

Underplating is used to enhance the performance. This process forms an internal diffusion barrier (Zn and Cu through gold) and prevents pollutants from reacting with base metals. It also acts as a medium to help the finish plating adhere to the base material. Nickel is the most common and important under-plate in current use for these reasons:

Corrosion resistance

Wear resistance

Solderability

Finish plating

Finish plating is the second step of the plating process that helps strengthen the electrical conductivity. There are various options for finish plating, depending on the design requirements and budget.

Excellent resistance to corrosion

Excellent conductivity and low electrical resistance

High cost

Excellent solderability and conductivity

Low durability and can form an oxide film

High cost

*Tin can be further characterized as bright tin or matte tin.

Bright tin can be easily identified by its glossy texture. It works well against corrosion, while sacrificing its solderability.

Matte tin, as opposed to bright tin, has a dull texture, which is not as appealing as the bright tin. However, it offers a good level of protection against corrosion without sacrificing its solderability.

This type of plating offers tin plating on the tail and gold plating on the contact area. It offers a good balance between the advantages of gold and the lower cost of tin.

Greenconn also offers more than just the standard gold and tin plating options. For more information on plating, please contact us as .

Plastic Insulators

Plastic

Insulators are fundamental to low profile board to board connectors. They are used to hold the conductors, or pins, together to create the desired shape of the connectors. Different insulators also perform differently regarding to their strength, weatherability, and chemical resistance.

Here are some of the plastic insulators Greenconn offers that can be used in a variety of applications:

Common Insulators

Polybutylene Terephthalate (PBT)

Excellent dielectric strength under high temperatures (230°C) and high humidity

Great formability with low shrinkage rate

Low flammability

Great impact strength

Available in Halogen-free options

Acrylonitrile Butadiene Styrene (ABS)

Good impact toughness even at low temperatures

Great wear resistance against rough surfaces

Shiny appearance

Economical

Insulators for High temperature(SMT-Grade)

High Performance Polyamide (PA 46 , PA 6T)

Temperature rating, PA46 290°C, PA6T 320°C

Good elongation

High rigidity, even at high temperatures

Available in Halogen-free options

Liquid-Crystal Polymer (LCP)

Temperature rating between 290-320°C

Great dimensional stability and weatherability

Chemically inactive

Great moldability, popular for designs requiring high precision and low flammability (UL 94V-0)

Available in Halogen-free options

Packaging Options

Packaging is critical in its ability to protect the goods during transportation and allow the receiver to open at ease.

Here are the various packaging options offered for Board-to-Board connectors:

Bulk (PE bag or small box)

Trays

Tubes

Tubes with Pick and Place (P&P) Cap or Kapton tape

Tape and Reel (T&R) with Pick and Place (P&P) Cap or Kapton tape

Tape and Reel (T&R)

Custom packaging

As a connector supplier, we can offer kinds of related products for sale, if you have needs, please contact us.

Other supplier products

	Female Header	Female header pinsare the corresponding parts of headers that mate directly to male pin headers. Female headers (often referred to as socket header...
	Board-to-Board Connectors	PCBboard to board connectorsand SMDboard to board connectorsare used to accurately interconnect printed circuit boards (PCBs) in a stackable manner...
	I/O Connectors	I/O(Input/Output)Connectorsareelectricalconnectorsthatprovidehighspeeddatatransmissionthroughmeansofasecureelectricalcontactbetweenfrequentlyinsert...
	GPEC208	Production status: Active If you would like to know more about this product, please contact us. Specifications： Current Rating： 1.0Amp Insula...
	Customized Connectors	At Greenconn, a trusted custom connector manufacturer, we offer countless standard connectors that are sold to our customers on a regular basis. Ho...

供应产品

Same products

	DF13 1.25mm series connectors	卖方: ZHEJIANG KUAILI ELECTRONIC CO., LTD.	The DF13 (1.25mm) connector stands out as a reliable and efficient solution for those seeking com...
	FPC 0.5mm/ H2.0B FPC Connector	卖方: ZHEJIANG KUAILI ELECTRONIC CO., LTD.	Series: FPC 0.5mm/ H2.0B FPC Connector Pitch: 0.5mm Material: Thermoplastic LCP/ PHOSHPOR BRASS...
	XKB connector DC-005-2.5A-2.5 instead CUI STACK CONECTOR POWER JACK MALE 2.5MM CLSD PJ-002B	卖方: ZK Electronic Technology Co., Limited	Product Details Category: Connectors PN:DC-005-2.5A-2.5 Brand: XKB Description:XKB connector ...
	BioHub Aseptic Connector & Disconnector	卖方: 百林科 Bio-Link	Single-use solutions are increasingly being used in bioprocessing production. For single-use biop...
	Conductive System Quick Connector End Cap	卖方: Zhejiang Huaqi Information Technology Co., LTD	plasticquickconnect.com/product/quick-connector/conductive-system-quick-connector/conductive-syst...