Dry magnetic-bias arc suppression coil
The operating principle of the arc suppression coil compensation device is to compensate the difference between the inductor current flowing through the fault point and the capacitive current by 180 degrees. After the compensation, the fault current flowing through the fault point is less than 5A, thus reducing the power system's occurrence due to the single-phase intermittent arc grounding.
在线联系供应商
Other supplier products
 |
Dry air-core filtering reactor high voltage and medium voltage | The filter reactor, usually connected in series in the capacitor circuit, provides a low-impedance path for a certain harmonic, avoiding excessive ... |
 |
Dry air-core series reactor high voltage and medium voltage | The series reactor, installed in the capacitor circuit, plays a role in suppressing the inrush current when the capacitor circuit is put in. At the... |
 |
reduce system loss high voltage and dynamic SVG in direct mounting | SVG(Static Var Generator), also referred to as STATCOM (Static Synchronous Compensator) is a modern static var compensator using self-commutation c... |
 |
Dry iron-core series reactor high voltage and medium voltage | In series with the high-voltage capacitor bank, access 6 ~ 35kV power system, used to limit the shunt capacitors in combination with the inrush cur... |
 |
achieve automatic group switching Shunt Capacitor bank automatic compensation-TBBZ | Mainly by the TRZ controller, vacuum contactors, high-voltage shunt capacitors, series reactors, fuses (or internal fuses), zinc oxide arresters, d... |
