WIRE DRAWING DIE BLANK
According to the working properties, the structure of drawing die core can be divided into five sections: "entrance area, lubrication area, working area, sizing area and exit area"（See figure 1）. The inner diameter profile of the drawing die is very important. It determines the tension required to compress the wire rod and affects the residual stress in the wire after drawing. The functions of each area of the die core are as follows: the entrance area is convenient for material threading and preventing the steel wire from scratching the drawing die from the entrance direction; the lubrication area is convenient for the steel wire to be brought into the lubricant; the working area is the main part of the die hole, and the deformation process of the steel wire is carried out here, that is, the original section is reduced to the required section size. When drawing metal with conical surface, the space occupied by the volume of metal in the working area is a circular table, which is called deformation area. The cone half angle α (also known as die half angle) in the working area is mainly used to determine the drawing force; the sizing area is used to obtain the exact size of the drawn steel wire; the outlet area is used to prevent the steel wire from surface scratching due to the instability of the steel wire exit.
Betalent carbide manufactures carbide wire drawing die core blank as per drawing, tolerance of diameter and hole can be controlled to be very small, hole tolerance can be controlled to be +/-o.1mm, adding a polishing machining process you can get final ready grinding hole no need wire cutting or other allowance removing machining process, which can save lots of labor and machining cost. Betalent has moulds for some size of wire drawing blank, more and more size molds are in making, please contact sales person for the ready moulds list if you want to check to see if the wire drawing die size you need can be available from ready moulds or not.
Xiamen Betalent Carbide Co., Ltd is a professional cemented carbide manufacturer. We provide Carbide Insert, Carbide End Mill, carbide product, pcd wire drawing dies, tungsten carbide wire drawing dies, diamond wire drawing dies, carbide drawing dies, carbide wire drawing dies, die angle in wire drawing, tungsten carbide drawing dies, cemented carbide toolsand so on. Want to know about wire drawing dies price? Please contact us.
在线联系供应商
Other supplier products
 |
4 FLUTE, 0.2 MM FLAT CARBIDE END MILL, SMALL DIAMETER MILL CUTTER FOR STAINLESS STEEL | 4 FLUTE, 0.2 MM END MILL, SMALL DIAMETER MILL CUTTER FOR STAINLESS STEEL Grain size Cutting dia. Grade ... |
 |
TUNGSTEN CARBIDE SEAL RINGS | TUNGSTEN CARBIDE SEAL RINGS In order to solve the connection and seal problem between cemented carbide seal ring and ring seat, four kinds of com... |
 |
WIRE STRIPPING BLADE | Wire stripping bladecan strip various types of wire materials: copper core wire, aluminum core wire, computer core, isolation wire, tele wire, PVC ... |
 |
CARBIDE ROLLER | Due to the high thermal conductivity of the cemented carbide, carbide roller has good heat dissipation, which shortens the time of the roll surface... |
 |
TAPER END MILL | The same as other end mills, there are flat end, corner radius end, and ball end. There are 2 flutes, 3 flutes, 4 flutes, and 6 flutes taper end m... |
Same products
 |
89mm Threaded Water Well Drill Pipe | 卖方: Jinzhou City TongShun Drilling Machine Co.,Ltd | Introducing our premium 60mm Threaded Water Well Geothermal Drill Pipe, specifically designed for... |
 |
无刷2速锂钻无绳电池 20-CD10 | 卖方: 江苏努埃博联德机电有限公司 | 全系列的 16v 和 20v 无刷系统为您提供变速控制和安全制动系统，配备多功能电池，并允许大量充电循环 电池电压：20v 钻孔直径：10mm 空载转速：2000r/min 最大扭矩：6... |
 |
无刷 2 速锂冲击钻无芯电池 16-CID10 | 卖方: 江苏努埃博联德机电有限公司 | 全系列的 16v 和 20v 无刷系统为您提供变速控制和安全制动系统，配备多功能电池，并允许大量充电循环 电池电压：16v 钻孔直径：10mm 空载转速：2000r/min 冲击频率：3... |
 |
无刷2速锂钻无绳电池 16-CD10 | 卖方: 江苏努埃博联德机电有限公司 | 全系列的 16v 和 20v 无刷系统为您提供变速控制和安全制动系统，配备多功能电池，并允许大量充电循环 电池电压：16v 钻孔直径：10mm 空载转速：2000r/min 最大扭矩：5... |
 |
无刷 2 速锂电冲击钻充电式电池20-CID13 | 卖方: 江苏努埃博联德机电有限公司 | 全系列的 16v 和 20v 无刷系统为您提供变速控制和安全制动系统，配备多功能电池，并允许大量充电循环 电池电压：20v 钻孔直径：13mm 空载转速：2000r/min 冲击频率：3... |
