WEAR PARTS
Carbide wear resistant partsare made of tungsten carbide and cobalt alloy. Tungsten carbide has superior properties, good wear resistance, and high hardness, and is suitable for manufacturing wear partsand mechanical parts with high-temperature resistance, high friction, and corrosion resistance. Carbide wear parts can replace steel wear parts perfectly in most industrial fields.
Cemented carbide can be used to produce small wear resistant castingssuch as ballpoint pen’s tip ball, saw tips, etc., big wear parts such as drawing die, wear parts of stamping machine or rolling mill in the steel industry. The finer the carbide grain size is, the higher hardness, the higher wear resistance, but the higher the processing technology requirements, the lower the impact resistance. Therefore, the user needs to be more cautious in applying the cemented carbide with fine grain size and ultra-fine grain size in the wear parts, which is more and more popular in the high-end field.
Betalent carbide blank for wear parts products series:
The core carbide part for wire drawing dies, with very high wear resistance. To draw different kinds of wire.
Carbide tube drawing dies, usually combined with the floating plug for tube drawing.
Various shapes carbide blank for wear parts.
Sub-micron grain size carbide is applied to the saw tip to enable the very sharp edge and the high wear resistance of the saw tip.
WEAR PARTS
Wire Drawing Die Blank
Tube Drawing Die Blank
Carbide Blank
Carbide Nozzle
Carbide Roller
Tungsten Carbide Seal Rings
Saw TipSaw Tip
Xiamen Betalent Carbide Co., Ltd isa professional carbide products inc, we provide carbide cutting tools,carbide product, etc.Want to know more? Please contact us.
在线联系供应商
Other supplier products
 |
SAW TIP | Xiamen Betalent Carbide Co., Ltd is one of theprofessional tungsten carbide manufacturers, focusing on designing, producing, and selling cemented ... |
 |
TAPER END MILL | The same as other end mills, there are flat end, corner radius end, and ball end. There are 2 flutes, 3 flutes, 4 flutes, and 6 flutes taper end m... |
 |
WATER METER SHAFT | The shell is made of cast iron. After water comes out from the water inlet, it passes through the lower annular space of the shell, which is called... |
 |
PCB DRILL BIT | PCB（Printed Circuit Board）, also called printed circuit board. It is glued together by several layers(4 layers, 6 layers or 8 layers) of resin mate... |
 |
CARBIDE ROD | Carbide rod of which tungsten carbide grain size ranges from 0.2micron to 0.8micron, cobalt content ranges from 6% to 12%, hardness ranges from 91.... |
