Bi-center bit for Mining Machinery and abrasive formation
Overview of Bi-center Bit
This type of bicenter bitmainly used for medium to medium-hard compressive and abrasive formation, it has medium and high-density parabolic crown and heavy cutters density for the bit has good impact resistance and anti-abrasive, high wear-resistant diamond gauge, the wholesale bi center drill bithas a longer service life.
In directional applications, bi centerbit performance usually presents performance challenges in terms of efficiency versus power availability and dynamic issues.
Cangzhou Great Drill Bits Co.,Ltd.designed the bi-center bit to enlarge the wellbore diameter, to replace under reaming, to help control rouble zones and for expandable tubular.
Bi-center Bit Design
As one of drill bit manufacturers, we designed this bi-center bits with close attention to hydraulic optimization to improve chip removal and ensure effective tool cooling. In addition to the improved hydraulic configuration, the cutting configuration was carefully studied to ensure that it is both effective and balanced - not only on conventional components but also when used in combination with a bent-case motor. This design concept of bi center bitscombined with GREAT's wide range of PDC cutters grades and geometries results in a bi-center drill with excellent drilling performance.
The Specification of Bi-center Bit
Here are the bi center drill bit sizes.
Reaming Size |
12 1/4" |
Nozzle Qty |
3NZ |
Pass Thru Size |
10 1/2" |
Gauge Lenghth |
|
Blade |
5 |
Connection |
6 5/8" API REG |
Primary Cutter Size |
16mm |
Make up Torque(kN.m) |
|
Rotary Speed(rpm) |
60~260 |
Weight on Bit(KN) |
30~260 |
180 |
Flow Rate(lps) |
35~70 |
The Advantage of Bi-center Bit
Our Bi-center bit is one piece body, you will never worry about broken.
We can adjust the bi-center diameter according to your casing diameter. Generally speaking, the bigger pilot bit has a smaller reaming size. The smaller pilot bit has a bigger reaming size.
GREAT's casing protection features cutting structure that provides a reliable way to drill, protecting both the cutting structure inside the casing and the casing itself.
During the design process, the pilot and reamer cutting structure of this PDC bit are force balanced as a single unit. This provides the bi center drill bits increased drilling efficiencies in both vertical and deviated wells.
在线联系供应商
Other supplier products
Core barrel with high performance rock roller bit for Pile Foundation | Overview of Core Barrel Roller Bit The roller bit core barreluses high carbon steel and a special bit Angle to maintain drilling strength and effi... | |
PDC cutters used for PDC bit, PDC hole opener, PDC reamer | Overview of PDC Cutter PDC cutters are made of diamond micro-powder and cemented carbide substrate sintered under ultra-high pressure and high tem... | |
Crocodile PDC Reamer | Well Drilling Equipment Crocodile PDC Reamer for Horizontal Drilling Overview PDC Reamer The PDC Reamer manufactured by GREAT China drill bitwill ... | |
PDC cutters used for PDC bit, PDC hole opener, PDC reamer | Overview of PDC Cutter PDC cutters are made of diamond micro-powder and cemented carbide substrate sintered under ultra-high pressure and high tem... | |
Steel Body PDC Bit | The Steel body PDC bit body is made of AISI 4145H round steel. The cost of Steel body PDC bit is lower than that of Matrix body PDC bit. Every S... |
Same products
89mm Threaded Water Well Drill Pipe | 卖方: Jinzhou City TongShun Drilling Machine Co.,Ltd | Introducing our premium 60mm Threaded Water Well Geothermal Drill Pipe, specifically designed for... | |
无刷2速锂钻无绳电池 20-CD10 | 卖方: 江苏努埃博联德机电有限公司 | 全系列的 16v 和 20v 无刷系统为您提供变速控制和安全制动系统,配备多功能电池,并允许大量充电循环 电池电压:20v 钻孔直径:10mm 空载转速:2000r/min 最大扭矩:6... | |
无刷 2 速锂冲击钻无芯电池 16-CID10 | 卖方: 江苏努埃博联德机电有限公司 | 全系列的 16v 和 20v 无刷系统为您提供变速控制和安全制动系统,配备多功能电池,并允许大量充电循环 电池电压:16v 钻孔直径:10mm 空载转速:2000r/min 冲击频率:3... | |
无刷2速锂钻无绳电池 16-CD10 | 卖方: 江苏努埃博联德机电有限公司 | 全系列的 16v 和 20v 无刷系统为您提供变速控制和安全制动系统,配备多功能电池,并允许大量充电循环 电池电压:16v 钻孔直径:10mm 空载转速:2000r/min 最大扭矩:5... | |
无刷 2 速锂电冲击钻充电式电池20-CID13 | 卖方: 江苏努埃博联德机电有限公司 | 全系列的 16v 和 20v 无刷系统为您提供变速控制和安全制动系统,配备多功能电池,并允许大量充电循环 电池电压:20v 钻孔直径:13mm 空载转速:2000r/min 冲击频率:3... |