Hydraulic Manifold
Ningbo Zhenhai Finotek Machinery Co.,Ltd is one of the leading China hydraulic manifold manufacturers and suppliers in China,Website:, welcome to buy or wholesale customized bulk hydraulic manifold from our factory.Hydraulic manifold is produced by aluminum or steel materials for hydraulic fluid system, which is usually used for regulation of hydraulic fluid flow between hydraulic pump and hydraulic actuator or other hydraulic device in hydraulic system. There are many channels inside the hydraulic manifold in order to control hydraulic pressure, flow rate between hydraulic device to meet the design requirements of hydraulic pump and valves.Finotek hydraulic manifold is available with or without valve, consolidate and optimized the hydraulic control function of each actuators, the raw materials is often manufactured in aluminum or steel for different hydraulic pressure requirement.Specifications of hydraulic manifold:Max. operation pressure: Hydraulic manifold in Aluminum materials for hydraulic of 21Mpa(210bar), hydraulic manifold in steel or cast iron materials for hydraulic pressure of 350Mpa(350bar) or moreMax. flow rate: From 0 to 800ml/min.Valve available: For hydraulic modular valve, hydraulic cartridge vavleValve working temperature: -22° F to +250° F (-30°C to +120°C)Solenoid voltage range: voltage tolerance from 90% 110%.Medium: Mineral-based fluids better
Other supplier products
|
|
|
Hydraulic Aluminum Lift Valve Manifold Block is Used in hydraulic lifting platform under solenoid valve voltage of AC 220V,Website:, AC 110V or DC2... |
|
|
|
DC Power Unit for Manual Stacker Type:Hydraulic Power Packs for Manual Operation Hydraulic Valve:Manual Release Valve ... |
|
|
|
Model NO.: FT Hydraulic Control Valve BlockType:Flow Control ValvePackage: Exporting package Specification:ISO9001: 2008Origin:Ningbo,Website:, Zhe... |
|
|
|
Direct Operated Pressure Relief Valve,Website: Valves |
|
|
|
Valve Block,Website: Blocks |
供应产品
Same products
