silicone adhesive sealant manufacturer for adhesive Electronic component
供应产品
Product Features
Features:
One component adhesive/sealant
Cures at room temperature when exposed to moisture in the air.
Alkoxy cure system,
Non-sag, paste consistency
UL94 V-0
RoHs Compliance: Yes
Applications:
Sealing lids and housings
General sealing and component protection
Processing
All surfaces must be clean and dry. Degrease and wash off any contaminants that could impair adhesion. Suitable solvents include isopropyl alcohol, acetone or methyl ethyl ketone. Good unprimed adhesion may be obtained on a variety of substrates, including enameled and painted steel, aluminum, ceramics, glass and certain plastics. Substrates to which good adhesion is normally not obtained include PTFE, PE, PP and related materials. Apply a bead of BN-RT200 H Adhesive/ Sealant to one of the prepared surface, and then quickly cover with the substrate to be bonded. Very deep sections, will take longer to cure completely.
Cure time
After skin formation, cure continues inward from the surface. Cure time is extended at lower humidity levels. Before handling and packaging bonded components, users are advised to wait a sufficiently long time to ensure that the integrity of the adhesive seal is not affected. This will depend on many factors and should be determined by the user for each specific application.
Packaging
100g/blister, 300ml cartridge.
Usable life and storage
BN-RT200 H has a shelf life of 12 months from the date of manufacture when stored at or below 30℃ in the original un opened containers.
在线联系供应商
Other supplier products
Phase change stored energystorage conductive Graphite sheet /flake for smartphone application | BN - PCM/BN - GNS series of thermal conductivity graphite sheet is using nanometer graphite and phase transformation capsule technology that ompoun... | |
hot-pressing and injecting Silicone Earplug for earphone application | It's adopts high performance silicon rubber as the raw material,it's adopting hot-pressing and injection method molding, meanwhile it can provide c... | |
Thermal Conductive compound for PCB/CPU/LED heat sink | ROHS Compliant: Yes UL recognized: Yes Features and Benefits: Thermal conductivity: 1~5.5 W/m·K Excellent thermal performance Good reliabil... | |
silicone thermal insulating tube for Transistor application | roduct Features Benefits Thermal Insulating Tubes (for transistors), which are made from high insulating silicone rubber and high thermal conducti... | |
hot-pressing and injecting Silicone automotive seal ring | The seal ring should have good sealing performance in the working pressure and certain temperature range, and the sealing performance will be impro... |
Same products
H4 insulation pressboard | 卖方: Huisheng Group co., Ltd. | Made by 100% sulphate coniferous wood pulp, with high mechanical and electrical strength, high te... | |
BW Series-Brackish Water RO Membranes UC BW-4040-82 | 卖方: UltraClean Membrane CO., Ltd | BW RO membrane elementsare mainly used for brackish water desalination. They provide excellent, s... | |
SW Series -Seawater Desalination RO Membranes UC SW-8040-400HR | 卖方: UltraClean Membrane CO., Ltd | UltraClean SW series are high-end RO membranes featuring a supporting layer with high compression... | |
SW Series -Seawater Desalination RO Membranes UC SW-8040-365HRLE/34 | 卖方: UltraClean Membrane CO., Ltd | UltraClean SW series are high-end RO membranesfeaturing a supporting layer with high compression ... | |
青稞纸电绝缘纸0.125mmQKZ-0125 | 卖方: 深圳市丹美森实业有限公司 | 序列号 指定 物业单位 单位指标值 价值观 1 标称厚度 公称厚度 mm 0.1 0.125 0.15 0.18 0.20 0.25 0.30 0.40 0.50 2 厚度公差 厚度允许公差 m... |