RFID Nail Tags with TK4100 for Trees Management, Compatible with EM4100
Suitable for the management of trees, cement/plastic/wood and other non-metallic products
Used in wet and chemical environment for its corrosion-resistant feature
The top of the nail tag is filled with epoxy, so that the transponder is completely water- and dust-resistant
Features:
Frequency: 125kHz
Chip type: TK4100/EM4100, read only
Size: 36.0 x 6.0mm
Weight: 2.5g
Housing material: IP68, nylon shell, fill with epoxy
Operating temperature: -25 to +75°C
Storage temperature: -25 to +85°C
Install method: Thwack the nail tag by a rubber hammer after drilling a hole
Applications:
Tree identification
Asset tracking
Article ID
Logistic and inventory
Other supplier products
|
|
Compact Flash RFID Reader with Various Software Compatibilities and Compact Flash Type A/B |
Powers:
5mA (typical) standby
90mA (typical) field scanning
5V (typical) operation
Complies with ISO 14443A protocol
Supports Mifare 1k S50, 1k S70... |
|
|
RFID Key Tags with 125kHz/13.56MHz Frequency, Different Colors and Designs are Available |
Features:
Small size and no fade
Water- and shock-resistant
Anti-corrosion
Available in different colors and designs
Customized colors and inkjet m... |
|
|
FM11RF08 Contactless Smart Card, Compatible with Mifare 1K S50 |
The FM11RF08 contactless smart card is based on FUDAN FM11RF08 IC, which is connected to a coil with a few turns, and then embedded in plastic
The ... |
|
|
125kHz Passive RFID Desktop Reader, Can Read and Write Temic T5577 and EM4100 Format |
Power:
5mA (typical) standby
90mA (typical) field scanning
5V (typical) operation
Comply with 11784/85 protocol:
Supports TK4100, GK4100, EM4100 ... |
|
|
125KHz Passive RFID Desktop Reader, Can Read and Write Hitag S and ISO11784/5 Tags |
Power:
5mA (typical) standby
90mA (typical) field scanning
5V (typical) operation
Comply with 11784/85 protocol:
Supports TK4100, GK4100, EM4100... |
供应产品
Same products
