Ac Frequency Inverter
Ac frequency inverter
Model
Input V
P capacity(KVA)
Input C(A)
Output C(A)
Motor P(KW)
S200-G0.4T4B
3 phase 380V range:±15%
1.0
2.4
1.2
0.4
S200-G0.75T4B
1.5
3.4
2.5
0.75
S200-G1.5T4B
3.0
5.0
3.7
1.5
S200-G2.2T4B
4.0
5.8
5.0
2.2
S200-G3.7/P5.5T4B
5.9
10.5
9/13
3.7/5.5
S200-G5.5/P7.5T4B
8.9
14.6
13/17
5.5/7.5
S200-G7.5/P11T4B
11.0
20.5
17/25
7.5/11
S200-G11/P15T4B
17.0
26.0
25/32
11/15
S200-G15/P18.5T4B
21.0
35.0
32/37
15/18.5
S200-G18.5/P22T4
24.0
38.5
37/45
18.5/22
S200-G22/P30T4
30.0
46.5
45/60
22/30
S200-G30/P37T4
3 phase 380V range:±5%
40.0
62.0
60/75
30/37
S200-G37/P45T4
57.0
76.0
75/90
37/45
S200-G45/P55T4
69.0
92.0
90/110
45/55
S200-G55/P75T4
85.0
113.0
110/150
55/75
S200-G75/P93T4
114.0
157.0
150/176
75/93
S200-G93/P110T4
134.0
180.0
176/210
93/110
S200-G110/P132T4
160.0
214.0
210/253
110/132
S200-G132/P160T4
192.0
256.0
253/300
132/160
S200-G160/P185T4
231.0
307.0
300/340
160/185
S200-G185/P200T4
242.0
350.0
340/380
185/200
S200-G200/P220T4
250.0
385.0
380/420
200/220
S200-G220/P250T4
280.0
430.0
420/470
220/250
S200-G250/P280T4
355.0
468.0
470/520
250/280
S200-G280/P315T4
396.0
525.0
520/600
280/315
S200-G315/P350T4
445.0
590.0
600/640
315/350
S200-G350/P400T4
500.0
665.0
640/690
350/400
S200-G400/P450T4
565.0
785.0
690/800
400/450
S200- P500/P550T4
3 phase 380V range:±15%
630.0
800.0
800
500/550
S200-G630/P700T4
630/700
Technical Specification
Item
Specification
Input
Rated voltage
T4 series: Three phase 380v,Website:, ±15%
Frequency
50/60Hz ±5%
Output
Voltage
Three phase 0-380V
Frequency
0-600Hz
Overload ability
Type G: 150% rated current for 1 minute, 180% rated current for 3 second;
Type P: 120% rated current for 1 minute, 150% rated current for 3 second.
Heat Dissipation
Cooling type
Forced Cooling
Temperature protection
Heatsink temperature >85degree trip protection against overheat
Fan control
Heatsink temperature> 50degree, fan forced operation, frequency inverter continue work
Control Performance
Control mode
Open-loop vector control, V/F control, Torque Control
Start torque
Open-loop vector control: 0.5Hz 180%;
VF control:0.5Hz 150%
Speed range
Open-loop vector control: 1:200;
VF control:1:100
Speed control precision
Open-loop vector control: ±0.2%;
VF control:±0.5%
Torque control precision
Open-loop vector control: ±5%
Torque response time
Open-loop vector control: <20ms
Function
Channel of operation command
Keyboard control,terminal control,communication control
Start mode
Direct start, DC injection braking before start, speed tracking before start
DC injection braking
Start DC injection braking, stop DC injection braking
Dynamic braking
Built-in braking unit < =15kw, G7-D dc case and the power from 18.5kw to 30kw could match built-in braking unit as your request, get external braking unit>37kw.
Frequency source choice
Keyboard digital frequency setting, analog V1 setting, analog V2 setting, Keyboard potentiometers setting, Multiple speed operation setting,
PID control setting, telecommunications setting, PLC program operation setting, HDI High Speed Pulse setting
Main and auxiliary frequency combination set
Just main frequency setting, just auxiliary frequency setting, QUICK/JOG or terminal switching selection, main frequency + auxiliary frequency, main frequency - auxiliary frequency, maximum, minimum, could realize Frequency overlay and fine adjustment function
Frequency resolution
Keypad setting:0.01Hz; Analog setting: 0.1%
Carrier frequency
0.5Khz~15.0Khz, both PWM mode could be chosen
Acc/Dec time
0.1~3600.0s
Multiple VF curve
Linear V/F curve, 2.0 times power drop torque V/F curve, custom V/F percentage (can realize manual energy saving control), multipoint VF curve.
Built-in PID
Built-in PID controller, apply to process control occasion such as water or gas supply. Meanwhile the sleep wake up function could save energy to the great extent possible.
Simple PLC operation
16 segment goal setting, frequency or mode of percentage setting could be chosen, each segment of operation time and direction could be set separately, and realize timing stop function.
Common function
Speed tracking, Cut-off restart, fault recovery, Automatic torque promotion, the motor’s parameters auto-learning, Pendulum frequency operation, hopping frequency, UP/DOWN control, AVR, Over-voltage stalling protection, rapid current-limiting, Instant power down and drop frequency operation
Input Output Signal
Analog input
V1:0~10V
V2:4~20mA or 0~10V, Select through JP2 jumper
Keyboard potentiometer input: 0~5V
Analog output
FM1:0~10V or 0~20mA, Select through JP9 jumper
FM2:0~10V or 0~20mA, Select through JP10 jumper. Need the support of SC-EXT1-IO expansion cards
Digital input
Standard configuration S1~S6.A total of 30 kinds of function could be selected.
Digital output
Standard configuration 2 channel including SP1, SP2 electrode output;1 channel relay output T1;
Expanding 4 channel relay output T2~T5 through SC-EXT2-R expansion cards.
High-speed pulse input
HDI: 0~50.0Khz, support by expansion cards SC-EXT1-IO
High-speed pulse output
HDO: 0~50.0Khz, support by expansion cards SC-EXT1-IO
Communication Port
Communication protocol
Based on RS485 hardware, support standard MODBUS protocol.
Expansion Cards
3 type expansion cards
Standard expansion cards SC-EXT1-IO, Relay expansion cards SC-EXT2-R (can realize one drives 2 function), Injection molding expansion card SC-EXT4-ZS, refer to the explanation in Appendix.
Display Functions
Five digital tube display
Can monitor the operation state of frequency inverter flexibly and conveniently; can set normal monitoring parameters separately when operation and stop.
Protection Function
25 kinds of protection functions
Including over-voltage, over-current, overheat, overload, under-voltage, short circuit, ground fault, input and output default phase, protect the frequency inverter running reliably all-round.
Installation Environment Requirement
Ambient temperature
-10degree~+40degree(ambient temperature is within 40degree~50degree, derating use is required), not allow to contact direct sunlight.
Humidity
Less than 90%RH, without condensation
Application environment
Non-corrosive, flammable, explosive, dust absorbent material, all kinds of lint does not accumulate.
Vibration
Less than0.6G
ElG7ation
0~1000m, reduce the rated specification 10% when lift 1000m for each.
Storage temperature
-20~60 degree
Technical advantageStable control model1:VF control:Multiple curves could be chosen,linear V/F curve,2.0 times power drop torque V/F curve,custom V/F percentage(can realize manual energy saving control) and multipoint V/F curve.This applies to the situation that one frequency inverter drives multiple motors,such as fan,water pump,engraving machine,injection molding machine etc.2:Open-loop vector control:steady speed with high precision,wide range of speed governing,as the speed ratio is 1:200 and frequency is 0.5HZ,we could output 180% rated torque .Good dynamic performance.Open-loop vector is suitable high-performance universal occasions such as machine tools,centrifuges,cranes and handling equipment,rolling mill and other loads.3:Torque control:Fast torque response,<20ms,precision torque:<5%,applied to winding,drawing and other occasions.4:Double row shows to monitor the frequency and current at the same time.Support 3 types expansion cards:Standard extension card,model SC-EXT1-10 function:High speed pulse input and output.One channel relay output,one channel analog output.Relay extensions cards,mode:SC-EXT2-R,function:4 channel relay output,apply to “one drive two” constant pressure water supply and other occasion.Injection machine extension card,model SC-EXT4-ZS function:it can reach 0~1A current signal 0~10V or 0~24V voltage signal,which is as the given signal of the inverter. ApplicationsThe situations which apply this equipment are boiler blower, draught fan and coal mine exhaust fan; lifts and elevators, oil field oil pipeline, injection pump and fuel delivery pump; energy-saving reconstruction of central air conditioning and air compressor; water circulating pump, make-up feed pump and constant pressure water supply; music fountain; plastic and chemical fiber extrusion equipment; metal processing machine tools: lathe, miller, planer and grinder; building materials: main drive equipment of cement and glass; rubber and plastics machinery; wire and cable extrusion equipment; various water tank type and straight metal drawing machines; metallurgy rod and wire and strip mill; copper-aluminum foil rolling equipment; textile dyeing and finishing equipment; film continuous printing and composite equipment; papermaking machinery, textile machinery, plastic machinery, ceramic machinery, electric machinery, numerically controlled lathe, food machinery and light industrial machinery and pharmaceutical machinery and so on; life, heating and fire water-supply of high-rise buildings, residence community and enterprise and public institution; central air circulation system and water supply system; industrial and mining enterprise production water, circulating cooling water and industrial boiler water supply system and so on; constant pressure oil transfer system including oilfield oil pipeline, oil depot, oil pump station and oil port; waterworks and water supply booster pump station; sewage and wastewater treatment; irrigationrainage system of large plaza, park Greenland and farm, fan and water pump OEM.
Other supplier products
供应产品
Same products