.

Dry Type Hipot Tester

Introduction

HIPOT tester is applied to test the insulation ability of electric power equipments and insulation materials at power frequency high voltage. The insulation test result of the tester is go or not go. Also the HIPOT tester is a universal power source in HV test. The maximum output voltage and capacity could be customized according the requirements of custom.

The tester is consists of single HV transformer and main control box. There are three kinds of HV transformer according to the insulation materials of the HV transformer. They are dry HV transformer,oil HV transformer and SF6 gas HV transformer. For the dry HV transformer the insulation material is epoxy resin. For oil HV transformer the insulation material is insulation oil. For SF6 HV transformer the insulation material is SF6 gas.The dry HV transformer has a smaller size and less weight than oil HV transformer. But the maximum output voltage is less than 100kv for dry HV transformer. The functions of the main control box are voltage output regulation, protection in emergency and voltage/current value indication.

Technique index

1)power supply:

AC 220V 50Hz/60Hz for transformers which the capacity less than 10kva

AC 380V 50Hz/60Hz for transformers which the capacity more than 10kva

2)HV transformer mode: single phase

3)maximum output voltage: 50kv/100kv/150kv/200kv/250kv optional

4)output capacity: 3kva/5kva/10kva/20kva/30kva/50kva/100kva/150kva/200kva optional

5)voltage read mode:analog or digital, direct HV voltage reading form voltmeter

6)current read mode:analog or digital, direct LV circuit current reading from amp meter

7)protection mode: LV circuit over current protection

8)voltage adjust mode: manual regulation

9)Rated frequency: 50Hz/60Hz

10)Automatic zero position lock unit to avoid wrong operation in HV output

11)work temperature: 0~50degree

12)work humidity: <80%

Model selection table

The detail power parameters for the common models HV transformer are as table 1. Please confirm the right model before order. The main parameters include input voltage, maximum output voltage and capacity.

The parameters in this table are response for HV transformer only and we will install the main control box according to the capacity and input voltage of the model you order

Table 1 Parameters for HV transformer

Type

Capacity

KVA

Low Voltage Input

High Voltage Output

No Load Current%

Impedance Voltage %

Weight max

Kg

Voltage V

Current

Voltage KV

Current mA

YD –1.5/50

200

50

30

4

10

22

YD –3/50

3

200

15

50

60

4

10

33

YD –6/50

6

200

30

50

120

4

10

53

YD –10/50

10

200

50

50

200

4

10

79

YD–10/100

10

400

25

100

100

4

10

98

Notice:

1) If the maximum voltage is less than 100kv we will offer dry HV transformer for the tester, otherwise we will offer oil HV transformer for the tester

2) The capacity and maximum voltage output could be customized according to the requirements of customer if you can not find the right one in this table

3) The weight listed in the table is HV transformer only it does not include the weight of main control box. Please confirm the total weight of the tester with our sales engineer before order



在线联系供应商

至: Wuhan Huaying Electric Power Tech & Science Co.,ltd
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Dry Type Hipot Tester
Dry Type Hipot Tester Introduction HIPOT tester is applied to test the insulation ability of electric power equipments and insulation materials at power frequency high v...
Transformer Load and No-load tester HYKF
Transformer Load and No-load tester HYKF Measure the transformer load current, load loss, short-circuit voltage, short circuit (load) losses. RMS phase voltage Average value of three-phase...
HYKC-2000 On Load Tap Changer Ohmmeter Analyzer
HYKC-2000 On Load Tap Changer Ohmmeter Analyzer 1.Introduction On load tap changer analyzer HYKC-2000 is mainly applied to test transient time, transition waveform, transition resistance, sync...
SLQ Primary Current Injection Test Set
SLQ Primary Current Injection Test Set Introduction: SLQ primary current injection test setis a high current generator instrument. It is applied in current transformer test, circuit brea...
HYBC-901 Transformer Ratio Meter
HYBC-901 Transformer Ratio Meter Transformer ratio meter Itistotestvoltageratio,vector,polarity,ratioerrorofcurrenttransformerandvoltagetransformer. Transformer turns ratio met...
供应产品

Same products

ACREL AID150 ALARM AND DISPLAY DEVICE
ACREL AID150 ALARM AND DISPLAY DEVICE 卖方: Jiangsu Acrel Electrical Manufacturing Co., LTD. The AID150 insulation monitoring device schneideris designed for visual and audible indication of...
ACREL ANSVG STATIC VAR GENERATOR
ACREL ANSVG STATIC VAR GENERATOR 卖方: Jiangsu Acrel Electrical Manufacturing Co., LTD. ANSVG series of reactive power and harmonic hybrid compensation devices are connected in parallel...
The Working Principle of Active Power Filter
The Working Principle of Active Power Filter 卖方: Jiangsu Acrel Electrical Manufacturing Co., LTD. Active power filter is a new type of power electronic device used to dynamically suppress harmoni...
ACREL PZ72L-DE MULTIFUNCTION DC ENERGY METER
ACREL PZ72L-DE MULTIFUNCTION DC ENERGY METER 卖方: Jiangsu Acrel Electrical Manufacturing Co., LTD. PZ series intelligent DC atorch electric energy meteris designed for applications such as DC pane...
ACREL DTSD1352-C SOLAR INVERTER SMART METER
ACREL DTSD1352-C SOLAR INVERTER SMART METER 卖方: Jiangsu Acrel Electrical Manufacturing Co., LTD. Acrel sungrow smart meterDTSD1352 din rail type multi-function energy meter is an intelligent ins...