HYJB-PC6 6 Phase Relay Tester

6 Phase Relay Tester

This tester with standard 6 phase voltage, 6 phase current output, voltage 125V/phase, current 30A/phase, 6 phases in parallel can up to 180A. Digital Signal Processor Microcomputer. Not only test the traditional relays and protectors, but also test the modern micro computer replays, special for transformer differential protection and transfer equipments.

Technical index:

1.AC current source
Current range: 6x (0~30A)/phase, accuracy 0.5%.
6 phase parallel current output: 180A
Phase current working value for allowed long time: 10A
Power: 300VA/phase
Maximum output power of 6 phases in parallel: 900VA
Maximum permitted work time of 6 phases in parallel: 10S
Frequency range: 0~1000Hz; accuracy: 0.001Hz
Harmonic time: 2~20; phase: 0--360°; accuracy: 0.1°
2.DC current source
Current range: 20A / phase, power: 300VA/phase, accuracy:0.5%
3.AC voltage source
Phase voltage output:6x( 0~125V)/phase, accuracy: 0.5%
Line voltage output: 0~250V
Phase voltage / Line voltage output power: 70VA / 100VA
Frequency range: 0~1000Hz accuracy: 0.001Hz
Harmonic time: 2~20; phase: 0--360°; accuracy: 0.1°
4.DC voltage source
Phase voltage output range: 0～±150V accuracy: 0.5%
Line voltage output range: 0～±300V
Phase voltage / Line voltage output power: 90VA / 180VA
5.Switch terminal
Switch input terminals: 8 pairs
Dead contact: 1-20mA, 24V active output inside the device.
Potential flip: 0--6V DC low level
15-250V DC high level
Switch output terminals: 4 pairs, dead contact, rupturing capacity: 110V/2A, 220V/1A
6.Time measurement range
Range: 1ms-9999s; accuracy: 1ms

Other supplier products

	HYGK-303 Circuit Breaker Analyzer	Circuit breakeranalyzergeneralintroduction: ThiscircuitbreakertesterisworkingonIEC62771, thecircuitbreakeranalyzerhasanaccuratedisplayscreenandrota...
	HYGK-307 Circuit breaker tester	Circuit breaker analyzer introduction: 1) Measurement of closing time, opening time, time spread between poles, time spread between units of on...
	HYDW grounding resistance tester	Application Type: 3A / 5A HYDW-grounding resistance tester is applied to measure the grounding resistance in power station or generator station ...
	HYGS Tan Delta Tester	1PowerFactor Testerapplication HYGS automatic tangent delta tester is applied to measure the dielectric loss and capacitor value of insulation mat...
	HYPCIT Primary current injection tester	Introduction: HYPCIT series primary current injection tester is applied in power system for circuit breaker test, protection system test and curre...

供应产品

Same products

	Air Permeability Tester STD- F8	卖方: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	卖方: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	卖方: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	卖方: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	卖方: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...