BK Industrial Control Transformer
Scope of Application
BK Industrial Control Transformer is suitable for the AC circuit of 50Hz/60Hz, which is used as the control power, local lighting and indicator light power supply for general electrical apparatus in machine tools and machinery.
The Industrial Control Transformer meets the standard: JB/T9646 standard.
Normal working conditions and installation conditions
The Industrial Control Transformer can work reliably under the following environmental conditions.
The altitude does not exceed 2000m.
The ambient air temperature upper limit is 40°C, and the lower limit is -5°C. (When the user needs to use it in the environment higher than 40°C or lower than -5°C, special instructions and special custom are required when ordering.)
When the max temperature is 40°C, the relative humidity of the air does not exceed 50%. At relatively low temperatures, higher relative humidity may be allowed, for example, 90% at 20°C. Special measures should be taken for the occasional condensation produced due to temperature changes.
In the ambient air, there is no no corrosive metal or harmful gas or dust that destroys insulation; In the use, Industrial Control Transformers must not be corroded by water, rain, or snow.
The power supply voltage is similar to the sine wave.
Specification
Industrial Control Transformer Rated capacity: 25VA, 50VA, 100VA, 150VA, 200VA, 250VA, 300VA, 400VA, 500VA, 700VA, 1000VA, 1500VA, 2000VA, 3000VA, 5000VA.
Industrial Control Transformer Primary voltage: 220V, 380V or according to user requirements;
Industrial Control Transformer Secondary voltage: 6.3V, 12V, 24V, 36V, 110V, 127V, 220V, 380V or according to user requirements.
Other supplier products
|
|
TXR1-700 Motor Soft Starter |
Product Overview TXR1-700 Soft Starter for AC three phase Motor is a new start-up equipment which integrates electric force and electron techniqus,... |
|
|
TXOUVRD-63 Voltage Protector |
Scope of Application TXOUVRD-63 Voltage Protector is also known as automatic reset over voltage protection device and under voltage protection devi... |
|
|
TSGC2 Three Phase Voltage Regulator |
Product Overview TSGC2 Three Phase Voltage Regulator is made of three single phase contact voltage regulators adopting "Y"-shaped connection; the c... |
|
|
TDGC2 Single Phase Voltage Regulator |
Product Overview TDGC2 Single Phase Voltage Regulator is an adjustable autotransformer structure; The coil is wound evenly around the ring-shaped i... |
|
|
DZ15LD Molded Case Circuit Breaker |
Scope of Application DZ15LD Molded Case Circuit Breaker is a circuit breaker with three lights display to indicate default phase, over-current, fau... |
供应产品
Same products
