TXCM1LE Molded Case Circuit Breaker
Scope of Application
TXCM1LE Molded Case Circuit Breaker is one of the new breakers which have been designed and developed by the company using international advanced technology. Suitable for the circuits of AC 50Hz, rated voltage of 400V, rated current of 16A to 800A.
Its main function is to provide indirect contact protection for personal electric shock of fatal danger. Rated residual operating current does not exceed residual current operated circuit breaker of 0.03A when other protection measures are invalid, also can provide supplementary protection for direct contact, but not as the only direct contact protection. At the same time, CM1LE MCCB can also prevent electrical fire caused by the contact fault current. And CM1LE MCCB can protect overload and short circuit of the circuits, can also be used for infrequent conversion of the circuits.
TXCM1LE MCCB can be mounted vertically (upright) or horizontally (transverse).
Meet the standards: GB 14048.2, IEC 60947-20
Normal operating conditions and installation conditions
Ambient air temperature
The upper limit of ambient air temperature is +40℃;
The lower limit of ambient air temperature is -5℃;
The average value of ambient air temperature within 24h does not exceed +35℃.
Altitude: The altitude of the installation site is not more than 2000m.
Pollution degree: 3.
Installation category: III.
Atmospheric conditions: The air relative humidity in the highest temperature + 40℃ for not more than 50%; In the low temperature can have higher relative humidity. The maximum average relative humidity is 90%, while the average monthly minimum temperature is +20℃, and consider the temperature changes in product on the surface of the gel.
External magnetic field: The external magnetic field in the vicinity of the installation site does not exceed 5 times the geomagnetic field in any direction.
Other supplier products
|
|
DZ47-125 Circuit Breaker |
Scope of Application DZ47-125 Miniature Circuit Breaker with protection of short circuit and overload, suitable for lighting and power distribution... |
|
|
CJX2 Contactor |
Scope of Application CJX2 Contactor is mainly used for the circuit of AC 50Hz (or 60Hz), the voltage to 660V, the rated operating current to 95A in... |
|
|
HG2B In-line Fuse Switch Disconnector |
Scope of application HG2B In-line Fuse Switch Disconnector is suitable for AC rated voltage 660V and below, AC 160A~630A, rated AC frequency 50Hz. ... |
|
|
TSD Wall Mounted Voltage Stabilizer |
Product Overview TSD Wall Mounted Automatic Servo Voltage Stabilizer are perfectly designed on the basis of the SVC Voltage Stabilizer, possessing ... |
|
|
PZ30 Plastic Electrical Distribution Box |
Product description TAIXI PZ30 Plastic Electrical Distribution Box (with the same Merlin Gerlin MCB distribution box, also known as Merlin box), it... |
供应产品
Same products
