Galvanized Polygonal Steel Pole
产品搜索
.
1. Voltage range: 10KV-750KV 2. Material: Q345B/ASTM A572 Gr50,Website:, Q235B/ASTM A36, Q420B/ASTM A572 Gr 60, Q460B/ASTM A572 Gr 653. Welding: 1 ) CO2 welding and submerged arc auto welding or other methods as AWS D1.12 ) Welded seam shall be full penetration and grinded.3 ) The welded product has no fissure, scar, overlap, layer or other defects.4.Surface Treatment: Hot Dip Galvanization or paintedThe tower galvanized as per ASTM A-123. Fasten parts as ASTM A-153,painting of international standard.5. MOQ: 1*40FT Container. 6. Price Term: EXW, FOB, CFR or CIF.7. Payment Term: 30% by T/T as deposit , balance by T/T or irrevocable L/C at sight before shipment. Other payment way can be negotiated.8. Delivery Lead Time: 30days after receiving deposit or as client’s requirements.9. Package: nude or bulk packing, bundle, wrapped by galvanized steel strap , woven bags ,mat ,straw bale or bubble plastic ,steel wire, plywood or according to client’s requirement.10.Lifetime: 50years11.Warranty: 15 years12.OEM is accepted.TermsDetailsVoltage10 KV ~750 KVUsageElectricity distribution,Power TransmissionCategoryTubular type ,suspention pole,turning pole,terminal poleMaterial GradeUsually Q345B/A572, Gr 50,60, 65 minimum yield strength>=345n/mm2 as main materialQ235B/ASTM36,minimum yield strength>=235n/mm2- as auxiliary material.Surface treatmentHot dip galvanized as ASTM A- 123, color polyester power ,painting or any other standard by client required.Design Load (Kg)300~ 3000KgMarkingName plate through rivert or danger plate,glue ,engrave ,emboss as per customer requirementDesignWe can design free of charge if Qty is numerous, client should supply the design parameters, geological suvey report,route outlineStandardsISO 9001:2008Joint of Poles or lattice or angular towersLap connection or flange connection, lattice tower by bolts and nuts.Length of per sectionWithin 14m once forming without slip jointWeldingSubmerged arc welding , internal and external double welding makes the welding seam beautiful in shape, CO2 weldingWelding Standard :AWS D 1.1 ( American Welding Society )Thickness1 mm to 50 mmPackages normally cover by Mat or straw bale at the top and bottom ,we can following by client required , each 40HC or OT can load how many will calculate based on the actually specification and data.There are six technicians who are in charge of the welding, assembly, bending、digging、round edge and galvanization in the workshops.All of the units have to be rechecked by them after the inspection by inspector who is from the quality department and then to the next process.
