Self -support 4 Legged Angular Tower
Communication Towers are usually built on the ground,Website: field , rooftop, strong bearing capacity of the wind. Angle Steel are main material used in towerstructures, including some steel plates and tubes. The structures can be also composed by steel tube only. Each section of the tower frame shall be connected by fasten bolts and nuts. All tower structures shall be hot dipped galvanized after fabrication. Angle Steel Tower shall be composed by tower boots, tower body, lightning rod, platform, climbing ladder, antennas brackets, feeder panel and lightning deflectors.
We supply and manufacture all tower related accessories and tower safety equipment. Our range of approved accessories include:
● GSM and MW Antenna Brackets
●Lattice and Monopole Tower Platforms
●Tower Safety Equipment
●Tower Paint Supply
●Navigation Lights and Cabling
●Tower Earthing Kits
●Cable Gantries and Support Ladders
●Tower Fastners
Terms
Detail
Height
5-100Meter
Wind Pressure
0-300 KM/H
Details & Shape
Mono pole, single pole ,triangular pole,square 4 legged, tubular or lattice type or combined
Material
Q345B/A572, minimum yield strength >=345MPA; Q235B/A36, minimum yield strength>=235MPA
Surface treatment
Hot dip galvanized as ASTM A- 123, color polyester power ,painting or any other standard by client required.
Design
We can design free of charge if Qty is numerous, client should supply the design parameters.
Standards
ISO 9001
Welding
Submerged arc welding , internal and external double welding makes the welding seam beautiful in shape
Welding Standard :AWS ( American Welding Society ) D 1.1
Working & Resting Platform Quantity
1-3 PCS
Antenna Support
3-18 PCS
Microwave Dish
3-18 PCS
Spare parts
All Necessary parts, e.g. Antenna Mount pole and Brackets , Climbing Steps, Safety Guide Cable tray,ladder, Lightning Rod, Mounting bracket for Obstruction light, Holding down bolts/nuts, and all other bolt and nuts required for erection and installation
Other supplier products
|
|
Product name:Columns and BeamsSpecification: Q345B/ASTM A572,Website:, Q235B/AST A36Column & Beam: Welded or Hot rolled H-sectionSurface: Hot DIP g... |
|
|
Derrick type stacks are one type of support system for an elevated flare. The elevated flare tip is mounted on top of a riser supported by a steel ... |
|
|
Our communications pole is designed and manufactured for durability,Website:, wear and corrosion resistance, and visual appeal. We begin with the h... |
|
|
Radio masts and towers are,Website:, typically, tall structures designed to support antennas (also known as aerials) for telecommunication... |
|
|
1. Voltage range: 10KV-750KV 2. Material: Q345B/ASTM A572 Gr50,Website:, Q235B/ASTM A36, Q420B/ASTM A572 Gr 60, Q460B/ASTM A572 Gr 653. Weld... |
供应产品
Same products