Blind & Buried VIA Hole PCB
Custom blind and buried vias fabricationfrom professional and experienced PCB board supplier at low cost.
First, we start with traditional multi-layer boards. The structure of a standard multi-layer circuit board is a process including an inner layer line and an outer layer line, followed by drilling, and metallization in the hole to achieve the internal connection function of each layer line. However, due to the increase in line density, the way parts are packaged is constantly updated. In order to allow for a wider board area, more high-performance parts can be placed. In addition to the thinner line width, the aperture is also reduced from 1 mm in the DIP jack to 0.6 mm in SMD, and further reduced to 0.4 mm or less. However, the surface area is still occupied, so that there are buried holes and blind holes.
HDI PCB
HDI PCB
HDI boards, one of the fastest growing technologies in PCBs, are now available at PCBSky. HDI Boards contain blind and/or buried vias and often contain microvias of .006 or less in diameter. They have...
The Buried Holes and Blind Holes are Defined as Follows
Blind Vias: A blind via is a type of via that connects the inner trace of the PCB to the trace of the PCB surface. This hole does not penetrate the entire board.
Buried Vias: Buried vias are only connected to the type of vias between the inner layers, so they are not visible from the surface of the PCB.
Advantages of Blind Buried Hole Printed Circuit Board
Eliminate a large number of through-hole designs and increase wiring density and package density;
Diversify and complicate the design of the interconnect structure of the multi-layer board;
Significantly improved the reliability of multi-layer boards and the electrical performance of electronic products.
The Following Three Points are Distinguished for Blind Buried Plate Boards
In contrast to the through hole, the through hole refers to a hole through which each layer is drilled, and the blind hole is a non-drilled through hole.
Blind and buried viasubdivision: blind hole, buried hole (outer layer is not visible).
Distinguish from the production process: blind holes are drilled before pressing, and through holes are drilled after pressing.
Blind buried hole technology is mainly used on relatively high-end PCBs, with high technical content and high requirements for blind hole PCBboard manufacturers.
CHINA CUSTOM PCBFABRICATION
PCBSKY is a professional PCB/FPC manufacturer in China, providing full PCB fabrication services in certified quality standards. We specialize in quick turn PCB & prototypes.
在线联系供应商
Other supplier products
 |
PCB Assembly | Ext PCBSKY is a national enterprise focusing on PCB and PCBA manufacturing for 8 years. The company has a strong engineering team and a professio... |
 |
PCB Assembly | PCBSKY is a national enterprise focusing on PCB and PCBA manufacturing for 8 years. The company has a strong engineering team and a professional el... |
 |
High Frequency PCB | Custom high frequency pcb from professional pcb manufacturer china shenzhen with factory price in low cost. The high frequency of electronic equipm... |
 |
Edge Plating/Half-hole PCB | Edge Plating/Half-hole PCB Hard Gold PCB HARD GOLD PCBVia in Pad VIA IN PAD PCB FABRICATION Conventional PCB Impedance Control PCB Gold Fingers PCB... |
 |
High Frequency PCB | Custom high frequency pcbfrom professional PCB manufacturer china Shenzhen with factory price in low cost. The high frequency of electronic equipm... |
Same products
 |
Professional PCB assembly manufacture for single side beauty mask PCB factory price PCBA service | 卖方: Shenzhen STHL Electronics Co.,Ltd. | SERVICES:electronic material procurement, PCB production, PCBA assembly, cable assembly, finished... |
 |
High quality PCBA service PCB Control Board for led driver and projector e-kit with Tin Plating Prototype PCBA service | 卖方: Shenzhen STHL Electronics Co.,Ltd. | SERVICES:electronic material procurement, PCB production, PCBA assembly, cable assembly, finished... |
 |
TSH-800 Crawler Mounted Water Well Drilling Rig | 卖方: Jinzhou City TongShun Drilling Machine Co.,Ltd | Versatile Drilling Capability: Drilling diameter range 140-400mm. Enhanced Efficiency: Drilling ... |
 |
多层PCB制造制造商组装工厂电路板SMT工厂制造 | 卖方: 840353 | Hello,很高兴在这里见到你。我是Topfast的伊森。我们是PCB PCBA一站式解决方案供应商超过20年。 您正在寻找一个伟大的PCB&PCBA供应商吗?PCB制造，Pcba P... |
 |
定制陶瓷PCB装配供应商工厂电路板PCB原型制造 | 卖方: 840353 | Hello,很高兴在这里见到你。我是Topfast的伊森。我们是PCB PCBA一站式解决方案供应商超过20年。 您正在寻找一个伟大的PCB&PCBA供应商吗?PCB制造，Pcba P... |
