HDI PCB

HDI PCBs, one of the fastest growing technologies in PCBs, are now available at PCBSky. HDI PCBs contain blind and/or buried vias and often contain microvias of .006 or less in diameter. They have a higher circuitry density than traditional circuit boards.

There are 6 different types of HDI PCBs, through vias from surface to surface, with buried vias and through vias, two or more HDI layer with through vias, passive substrate with no electrical connection, coreless construction using layer pairs and alternate constructions of coreless constructions using layer pairs.

HDI any-layer printed circuit boards are the next technological enhancement of HDI microvia printed circuit boards: all the electrical connections between the individual layers consist of laser-drilled microvias. The main advantage of this technology is that all the layers can be freely interconnected. To produce these circuit boards, PCBSky uses laser-drilled microvias electroplated with copper.

Special Technologies Used with HDI Any-layer Printed Circuit Boards

Edge plating for shielding and ground connection

Minimum track width and spacing in mass production around 40μm

Stacked microvias (plated copper or filled with conductive paste)

Cavities, countersunk holes or depth milling

Solder resist in black, blue, green, etc.

Low-halogen material in standard and high Tg range

Low-DK Material for Mobile Devices

All recognised printed circuit board industry surfaces available

HDI PCB Technology Sheet

PCBSky HDI PCB Structures

PCBSky HDI PCB Capabilities: Microvias PCB

A microvia maintains a laser drilled diameter of typically 0.006" (150µm), 0.005" (125µm), or 0.004" (100µm), which are optically aligned and require a pad diameter typically 0.012" (300µm), 0.010" (250µm), or 0.008" (200µm), allowing additional routing density. Microvias can be via-in-pad, offset, staggered or stacked, non-conductive filled and copper plated over the top or solid copper filled or plated. Microvias add value when routing out of fine pitch BGAs such as 0.8 mm pitch devices and below.

Additionally, microvias add value when routing out of a 0.5 mm pitch device where staggered microvias can be used, however, routing micro-BGAs such as 0.4 mm, 0.3 mm, or 0.25 mm pitch device, requires the use of Stacked MicroVias using an inverted pyramid routing technique.

Any PCB Layer HDI

4/8 mil laser via capture pad size

Material Options

High temperature FR4

Halogen - Free

Welcome to order HDI PCB from PCBSky at a very competitive HDI PCB price.

CUSTOM PCB CHINAFABRICATION

PCBSKY is a professional PCB/FPC manufacturer in China, providing full PCB fabrication services in certified quality standards. We specialize in quick turn PCB & prototypes.

Other supplier products

	Double Sided Flexible PCB	After the double-sided PI board copper-clad board material is used in the double-sided circuit, a protective film is added on both sides to form a ...
	High Frequency PCB	Custom high frequency pcb from professional pcb manufacturer china shenzhen with factory price in low cost. The high frequency of electronic equipm...
	Blind & Buried VIA PCB	Custom blind and buried vias fabricationfrom professional and experienced pcb board supplier at low cost. First of all, we start with traditional ...
	HDI PCB	HDI PCBs, one of the fastest growing technologies in PCBs, are now available at PCBSky. HDI PCBs contain blind and/or buried vias and often contain...
	Gold Fingers PCB	Among the large-scale use of PCI and optical modules and cable sockets, the gold fingers PCB has been divided into: long and short gold fingers, br...

供应产品

Same products

	Professional PCB assembly manufacture for single side beauty mask PCB factory price PCBA service	卖方: Shenzhen STHL Electronics Co.,Ltd.	SERVICES:electronic material procurement, PCB production, PCBA assembly, cable assembly, finished...
	High quality PCBA service PCB Control Board for led driver and projector e-kit with Tin Plating Prototype PCBA service	卖方: Shenzhen STHL Electronics Co.,Ltd.	SERVICES:electronic material procurement, PCB production, PCBA assembly, cable assembly, finished...
	TSH-800 Crawler Mounted Water Well Drilling Rig	卖方: Jinzhou City TongShun Drilling Machine Co.,Ltd	Versatile Drilling Capability: Drilling diameter range 140-400mm. Enhanced Efficiency: Drilling ...
	多层PCB制造制造商组装工厂电路板SMT工厂制造	卖方: 840353	Hello,很高兴在这里见到你。我是Topfast的伊森。我们是PCB PCBA一站式解决方案供应商超过20年。 您正在寻找一个伟大的PCB&PCBA供应商吗?PCB制造，Pcba P...
	定制陶瓷PCB装配供应商工厂电路板PCB原型制造	卖方: 840353	Hello,很高兴在这里见到你。我是Topfast的伊森。我们是PCB PCBA一站式解决方案供应商超过20年。 您正在寻找一个伟大的PCB&PCBA供应商吗?PCB制造，Pcba P...