PLATED THROUGH HOLE PCB / PTH PCB

Speedapcb - The printed circuit board manufacturersin China, established in 2014, is located in Changsha, Hunan Province. The company focuses on high-speed PCB design, printed circuit board manufacturing, SMT welding processing, and supply chain services. Products are widely used in communications equipment, computers and network equipment, consumer electronics, automotive electronics, industrial control, new energy, rail transportation, and other industries.

There are three common types of drilled holes in the printed circuit board: pcb through hole plating, blind via hole, and buried pcb via hole. Therefore, PCBs are classified according to drilling methods and can be divided into pth hole in pcb, pcb via plating, pth board, pcb board with holes, through hole pcb assemblyand pcb hole plating.

PTH is the most common drilling method, and it is common in various types of PCBs. SPEEDAPCB has been focusing on the production of various PTH (plated through hole PCB-PTH PCB), buried via hole PCB and blind via hole PCB.

HAVE A QUESTION OR REQUEST?

Click below, we’ll be happy to assist.

Drilling Method of Plated Through Hole PCB

Plated Through Hole, the copper foil lines between conductive patterns in different layers of the circuit board are connected or connected with this type of hole, but the copper legs of the component lead or other reinforced materials cannot be inserted. The PCB is formed by the accumulation of many copper foil layers. The copper foil layers cannot communicate with each other because each layer of copper foil is covered with an insulating layer, so they need to rely on via for signal connection.

The through hole of the circuit board must pass through the plug hole to meet the customer's needs. In changing the traditional aluminum sheet plugging process, the solder mask and plug hole on the circuit board surface are completed with a white net to make its production more stable and the quality more reliable , More perfect to use. The vias help the circuits to be connected to each other. With the rapid development of the electronics industry, higher requirements are also placed on the PCB manufacturing process and surface mount technology. The plugging process for vias came into being, and at the same time, it must meet the following requirements:

3. The through hole must have a solder resist ink plug hole, opaque, no tin rings and beads, and must be flat.

Through-hole boards are common in all fields and are one of the most common PCBs.

Generally, the mobile board or PDA board has a board that uses a combination of blind and buried holes. The buried hole can reduce the probability of signal interference, maintain the continuity of the transmission line's characteristic impedance, and save routing space. Circuit board design. This type of board requires high technical content and accurate accuracy, so relatively speaking, the requirements for factory equipment are much higher than ordinary multilayer boards, and the cost of such circuit boards will be much higher than ordinary Shelf should be high.

Parameters of Plated Through Hole PCB

Items
Max board size		580X700mm
Boar Material		FR-4,Aluminum, High Tg FR4,CEM3,etc.
Min trace width/ space (inner layer)		4mil/4mil(0.1mm/0.1mm)
Min PAD (inner layer)		5 mil(0.13mm)
Min thickness(inner layer)		4 mil(0.1mm)
Inner copper thickness
Outer copper thickness
Finished board thickness
	±0.10 mm	±0.10 mm
Board thickness tolerance control	±10%	±10%
	±10%	±10%
Inner layer treatment		brown oxidation
Layer count Capability		1-30 LAYER
alignment between ML		±2mil
Drill hole diameter
Aspect ratio of plated hole		10:01
Hole precision		±2 mil(±0.05mm)
tolerance for Slot		±3 mil(±0.75mm)
Hole diameter tolerance(PTH)		±3 mil(±0.075mm)
Hole diameter tolerance(NPTH)		±1mil(±0.025mm)
Max Aspect Ratio for PTH		8:01
Hole wall copper thickness		15-50um
Alignment of outer layers		4mil/4mil
Min trace width/space for outer layer		4mil/4mil
Tolerance of Etching		+/-10%
Thickness of solder mask		on trace
Thickness of solder mask	at trace corner	≥0.2mil(5um)
Hardness of solder mask	On base material	≤+1.2mil
	6H	Finished thickness
Alignment of solder mask film		±2mil(+/-50um)
Min width of solder mask bridge		4mil(100um)
Max hole with solder plug
Surface treatment		HAL (Lead or Lead free), immersion Gold, Immersion Nickel, Electric Gold finger, plated Gold, OSP, Immersion Silver.carbon oil,etc.
Max Nickel thickness for Gold finger		280u"(7um)
Max gold thickness for Gold finger		30u"(0.75um)
Nickel thickness in Immersion Gold		120u"/240u"(3um/6um)
Gold thickness in Immersion Gold		2u"/6u"(0.05um/0.15um)
Impedance control and its tolerance		50±10%,75±10%,100±10% 110±10%
Trace Anti-stripped strength		≥61B/in(≥107g/mm)
bow and twist

Other supplier products

	LEAD FREE HASL PCB / IMMERSION TIN PCB	LEAD FREE HASL PCB / immersion tin pcb Lead-free HASL is to coat a layer of tin-lead alloy on the copper surface to prevent the oxidation of the co...
	Large & Small PCB	Nowadays, the reduction of the size of the basic printed circuit board supplierwill reach half or the quarter of the original size. The extremely t...
	SPEEDA PCB BOARD PRODUCT	Speedapcb - The pcb supplierin China, established in 2014, is located in Changsha, Hunan Province. The company focuses on high-speed PCB design, pr...
	SPEEDA PCB BOARD PRODUCT	PCB is the printed circuit board, which is one of the important parts of the electronics industry. Almost every kind of electronic equipment, from ...
	A NEW TYPE OF WIRE BOARD——RIGID FLEX PCB	Speedapcb - The PCB design companyin China, established in 2014, is located in Changsha, Hunan Province. The company focuses on high-speed PCB desi...

供应产品

Same products

	用于 FR4 / FPC 355nm 激光波长的大面积 PCB 分板机	卖方: 东莞市创威智能装备有限公司	这款激光分板机是一款功能强大且先进的 pcb 分板机、pcb 板切割机和 pcb 切割机。它旨在提供 FR4/FPC 材料的高深度切割、软件控制作和分板。该机器配备 10W/12W/15W/18...
	Lanrui G4 防爆分板工具 PCB 分离	卖方: 深圳维客修科技有限公司	产品描述 Lanrui G4 防爆拆板笔，强磁吸力，适用于分离 iPhone 手机主板，且不损坏手机。Lanrui 手机主板拆板笔配备可旋转强磁吸盘，可辅助拆卸各种双层主板，有效解决传统拆板方式...
	Professional PCB assembly manufacture for single side beauty mask PCB factory price PCBA service	卖方: Shenzhen STHL Electronics Co.,Ltd.	SERVICES:electronic material procurement, PCB production, PCBA assembly, cable assembly, finished...
	High quality PCBA service PCB Control Board for led driver and projector e-kit with Tin Plating Prototype PCBA service	卖方: Shenzhen STHL Electronics Co.,Ltd.	SERVICES:electronic material procurement, PCB production, PCBA assembly, cable assembly, finished...
	TSH-800 Crawler Mounted Water Well Drilling Rig	卖方: Jinzhou City TongShun Drilling Machine Co.,Ltd	Versatile Drilling Capability: Drilling diameter range 140-400mm. Enhanced Efficiency: Drilling ...