Hydraulic Casing Tong
Casing Power Tong is used to make up and break out for casing operation in oil fields. It has greatly reduced the labor of worker, enhanced connection quality of thread and diminished accidents in inappropriate casing operation.Characteristics:●Opening type, convenient and prompt to enter and slide off the working position, with an integral tong head of great strength and rigidity;●Double swing head jaws, convenient to assemble and disassemble. The design of best cutting diameter can ensure the reliable clamping and easy back climbing;●Brake belt assembly, easy to operate and convenient to maintain and replace;●Open gear supporting structure, improving the strength and rigidity.●Wholly hydraulic mode and mechanical gear shift,simple and reliable structure.●Manganese steel plate used on the shell , increasing the strength. The jaws are cast with precise technology, artistic and strong.●With hydraulic torque indicator and also installation interface, convenient to realize the computer management.ModelTQ245/20YTQ340/35YATQ508/70YTQ356-55Application range41/2’’ 5’’ 51/2’’7’’ 85/8’’ 95/8’’51/2’’ 65/8’’ 7’’ 85/8’’ 95/8’’ 103/4’’ 135/8’’95/8’’103/4’’135/8’’ 16’’ 185/8’’ 20’’41/2’~14’’High Gear Torque2600N.m @ 12MPa1924ft-lbs @ 13.8MPa3540ft-lbs @ 17.3MPa7500ft-lbs @ 16.6MPa3319ft-lbs @2400psiLow Gear Torque20000N.m @ 12MPa14800ft-lbs @ 13.8MPa25814ft-lbs @ 18MPa50000ft-lbs @ 16.6MPa42400ft-lbs @2400psiHigh Gear rpm67r/min42r/min26r/min76r/minLow Gear rpm9r/min6r/min4r/min4r/minOil Flow120 L/min31.7 gpm120 L/min31.7 gpm132.5 L/min35 gpm160 L/min30 gpmDimension: L x W x H1500x 630 x 6501580 x 900 x 8501980 x 1219 x 6901590 x 950 x 900Weight(including Backup Tong)500kg1100lbs750kg1650lbs1450kg3200lbs850kg1870lbsCharacteristics:●Master, backup tong are all use three-jaw clamp system, ensure the minimum damage to the tube pillar. Two front jaw of master tong is swing type, rear type is roller climbing type, disassembling is very convenient, The design of best cutting diameter can ensure the reliable clamping and easy back climbing; the master tong is liquid push climbing three-jaws structure, which is simple, and reliable;●Four gear speed used, wide range of speed adjustment, rated torque high;●Brake belt assembly, easy to operate and convenient to maintain and replace;●Open gear supporting structure, improving the strength and rigidity.●High strength steel plate used on the shell,increasing the strength. The jaws are cast with precise technology, artistic and strong.●Hydraulic torque indicator is provided. And installation interface of turning torque instrument is provided for computerized management.ModelKD20-50KD13375KJD9625Application range95/8’’~20’’41/2’’~133/8’’41/2’’~ 95/8’’High Gear Torque10000N.m @ 18MPa7000ft-lbs @ 16MPa3500ft-lbs @ 13.8MPa3254ft-lbs @2000psiLow Gear Torque70000N.m @ 18MPa50000ft-lbs @ 16MPa25800ft-lbs @ 13.8MPa16270ft-lbs @2000psiHigh Gear rpm23r/min42r/min84r/minLow Gear rpm3r/min6r/min16r/minOil Flow132 L/min35gpm120 L/min32 gpm151 L/min40 gpmDimension:L x W x H1500x 630 x 6501490 x 1055 x 6501050 x 620 x 900Weight(including Backup Tong)1620kg3571lbs1336kg2940lbs500kg1100lbsModelKHT5500KHT9625KHT13625Application rangeMaster tongBack tong23/8’’~51/2’’23/8’’~61/2’’27/8’’~ 95/8’’27/8’’~ 101/2’’4’’~135/8’’High Gear Torque2500N.m @ 14MPa3400ft-lbs @ 14MPa3600ft-lbs @ 16MPaLow Gear Torque20000N.m @ 14MPa27000ft-lbs @ 14MPa34000ft-lbs @ 16MPaHigh Gear rpm78r/min65r/min30r/minLow Gear rpm9.5r/min6.5r/min5r/minDimension: L x W x H1220 x860 x 17081500 x 790 x 17501508 x 857x 1194Weight(including Backup Tong)950kg2100lbs800kg1760lbs619kg1360lbs
Other supplier products
|
|
Low Stress Power Tong |
This power tong is uesd for qucik make-up and break-out special thread and material 27/8’’~41/2’’' tubing and 41/2’’~51/2’’ casing in well service... |
|
|
Drill Pipe Tong |
Drill pipe power tong is suitable for petroleum and mine drilling operation. Tong head is opening type, it can automatically release the drill pipe... |
|
|
Open-faced Tubing Tongs |
Open-faced Tubing Tong is a special device for Well Service, which is used to make up and break out tubing thread. Driving by hydraulic motor with... |
|
|
Sucker Rod Tong |
This series power tong is an opening type power tong, which is used to make up and break out sucker rod's joint casing thread in well service.It ha... |
|
|
Hydraulic Casing Tong |
Casing Power Tong is used to make up and break out for casing operation in oil fields. It has greatly reduced the labor of worker, enhanced connec... |
供应产品
Same products
