A106 Gr.B hot rolled Seamless Steel Pipe
ASTM A106 seamless pressure pipe (also known as ASME SA106 pipe) is commonly used in the construction of oil and gas refineries, power plants, petrochemical plants, boilers, and ships where the piping must transport fluids and gases that exhibit higher temperatures and pressure levels. NPS 1-1/2″ and under may be either hot finished or cold drawn. NPS 2″ and larger shall be hot finished unless otherwise specified.
Production : hot rolled, cold drawn.
Diameter size: 3/4inch to 32inch; DN20 to DN800; 26mm to 812mm
Wall thickness: 2mm to 52mm, The minimum wall thickness at any point shall not be more than 12.5% under the nominal wall thickness specified.
Length of pipe: random length, 5.8m/6m, 11.8m/12m or as customer’s require.
Other supplier products
|
|
API 5CT N80 P110 Oil Tubing |
API 5CT N80 type tubing is used in the medium pressure drilling environment. It is installed inside of the casing pipe, oil will be drilled from we... |
|
|
API 2 7/8 inch EUE oil tubing |
1.Specification range:OD: 42.16 MM - 114.3 MM(1.66"--4 1/2") WT: 3.56-16mm(2.3ppf-26.1ppf)
2. Materials: H40, J55, K55, N80-1, N80-Q, L80-1,L80-... |
|
|
API 5CT K55 Oil Casing Pipe |
API-5CT K55 oilfield casing pipe is very similar to J55, there is no significant difference in the chemical composition and yield strength, however... |
|
|
API 5CT N80 Oil Casing Pipe |
API-5CT N80 oilfield casing pipe contains N80-1 and N80-Q types. Those two materials are absolutely consistent regarding the chemical composition a... |
|
|
API 5CT P110 Oil Casing Pipe |
The P110 API-5CT steel casing pipe is the high grade amongst other grades of steel. White band is marked on the finished
casing to point out the m... |
供应产品
Same products
