A106 Gr.B hot rolled Seamless Steel Pipe
ASTM A106 seamless pressure pipe (also known as ASME SA106 pipe) is commonly used in the construction of oil and gas refineries, power plants, petrochemical plants, boilers, and ships where the piping must transport fluids and gases that exhibit higher temperatures and pressure levels. NPS 1-1/2″ and under may be either hot finished or cold drawn. NPS 2″ and larger shall be hot finished unless otherwise specified.
Production : hot rolled, cold drawn.
Diameter size: 3/4inch to 32inch; DN20 to DN800; 26mm to 812mm
Wall thickness: 2mm to 52mm, The minimum wall thickness at any point shall not be more than 12.5% under the nominal wall thickness specified.
Length of pipe: random length, 5.8m/6m, 11.8m/12m or as customer’s require.
Other supplier products
|
|
API 2 7/8 inch EUE oil tubing |
1.Specification range:OD: 42.16 MM - 114.3 MM(1.66"--4 1/2") WT: 3.56-16mm(2.3ppf-26.1ppf)
2. Materials: H40, J55, K55, N80-1, N80-Q, L80-1,L80-... |
|
|
API 5L Grade B seamless steel pipe |
API 5L Seamless Steel Pipe are used to transport fluid, such as the transportation of oil, natural gas, gas, water and etc. Product Application: Fl... |
|
|
API 5CT N80 Oil Casing Pipe |
API-5CT N80 oilfield casing pipe contains N80-1 and N80-Q types. Those two materials are absolutely consistent regarding the chemical composition a... |
|
|
API 5CT L80 Oil Casing Pipe |
L80 belongs to steel grades group of corrosion-resistant casing. L80 API oilfield casing pipe includes L80-1, L80-9Cr, and
L80-13Cr. L80-1 is used... |
|
|
API 2 7/8 inch pup joints |
Standards - API or customer specification
Sizes - 1" to 4-1/2" EUE & NUE, 1" to 2-1/16" IJ
Lengths (+/- 3") - 2’, 3’, 4’, 6’, 8’, 10’, 12’ & ... |
All supplier products
Same products
