oil density Tester FDT-1531
Application range
Electric furnace process carbon residue tester is designed and manufactured according to the requirements specified by the the the National Petrochemical industry standard SH/TO170 "petroleum products Determination of carbon residue (electric furnace method), applicable to the determination of the lubricating oil, heavy liquid fuel or other petroleum products carbon residue.Features
1, the instrument uses the integrated structure design, furnace and controller to form a complete whole new aesthetic.
2, digital temperature controller, main heating and auxiliary heating function, auxiliary heating according to the needs of both automatic control can be manually controlled, easy to use.
3, the highest temperature up to 520 ° C furnace temperature control accuracy up to full temperature control within ± 5 ℃, meet the test requirements.
3 instrument for desktop structure, furnace furnace four hole, four samples can be placed at the same time at the same time test, test high efficiency.
Application range
Automatically trace carbon residue tester is an automatic test equipment for the petroleum products in accordance with the requirements of GB / T 17144, ISO 10370 and ASTM D4530 technology manufacturing.Auto range of trace amounts of carbon residue analyzer the measurement of residual carbon was 0.10% (m / m) ~ 30.0% (m / m).Determination of the results of the equivalent of the carbon residue value exceeds 0.10% (m / m) of petroleum products this tester measurement results and Conradson carbon residue method (GB / T 268).
The automatic trace amounts of carbon residue oximeter also applicable to the determination of the residual carbon values less than 0.10% (m / m), the composition of petroleum products by the distillate.For this product, the first used in GB / T 6536 prepared in 10% (V / V) distillation residue, and then use the auto trace residual carbon analyzer measured.Features
automatic temperature control, automatic constant temperature system
automatically switch traffic, convenient
with one-button operation, the entire test process can be fully automated
· automatic trace carbon residue tester saver test process anomalies and the furnace temperature ultra-high after the instrument will automatically stop and alarm
· automatic trace carbon residue tester using stainless airway emissions, low-carbon, environmentally friendly
· automatic trace carbon residue tester hint system, automatic alarm at the end of the experimentSpecifications
· the combustion chamber operating temperature range: room temperature ~ 500 °C
· the combustion chamber temperature accuracy: 500°C ± 2.0°C; thermostat 15min
· set the time error: <0.1S
· pressure adjustment range: 0 kPa (0 kg/cm2) ~ 392 kPa (4kg/cm2);
· the flow adjustment range: 100 ml / min to 1000 ml / min; automatic switching of 150 ml / min and 600 ml / min;
· the heater power: 1000W
· the temperature control: digital temperature controller
Other supplier products
|
|
快速阻垢性测定仪 FDQ-0202 |
The sulfur organic Meter FDQ-0601
Application range
Organic sulfur analyzer meet GB/T2449, applies to Sulfur obtained from natural gas refineries... |
|
|
变压器油氧化安定性测定仪 FDH-1001 |
grease drum Stability meter FDH-4401
Application range
The grease drum Stability tester applicable standards ASTM D1831 SH/T0122
Measured w... |
|
|
FDH-1402发动机油表观粘度测定仪（CCS) |
产品介绍
适用范围发动机油表观粘度测定仪适用标准：GB/T6538 ASTM D5293 该仪器主要测试发动机油的低温动力粘度指标，采用当代先进技术，集机械、光学电子及计算机技术于一体，进行温度测量，恒温控制。控温精确、稳定。发动机油表观粘度测定仪结构合理，性能稳定，操作简单，是理想的分析检... |
|
|
FDR-1141 Copper Strip Corrosion Tester |
Copper Strip Corrosion Tester
Specifications
Determine corrosiveness of aviation gasoline, jet fuels, vehicle gasoline, natural gasoline, hydrocarb... |
|
|
oil density Tester FDT-1531 |
Application range
Microcoulometric sulfur measurement instrument using the principle of micro-coulometric titration, after the sample combustion re... |
供应产品
Same products
