.

24KV Vacuum Circuit Breaker

The 24KV breaker switch unit is comprised of three poles, the operating mechanism, and the operating mechanism housing. The sequence of the poles is A -B – C or 1 – 2 - 3 (sequence left to right when viewed from the lower terminal side of the recloser switch unit.

Each 24kv vacuum circuit breaker byGOPOWERis embedded in a solid-insulated pole made of weather-proof cyclo aliphatic epoxy resin. This enables a small design as well as resistance against environmental effects.

Breaker principle and design of 24KV Vacuum Circuit Breaker

ZW32 series 24KV circuit recloser are used in distribution systems. 24kv vacuum circuit breakes are used to make and break normal and fault currents. Breakers are fully equipped with sensors and a controller to provide a means of protection and control.

In case of a line fault, breakers can break and make currents several times, thus avoiding longer network interruptions due to temporary faults. The manufacture, design, and testing of the vacuum recloser is based on current standards IEC 62271-111:2019

Technical Parameters of 24KV Vacuum Circuit Breaker

Products Type

ZW32-24

Maximum System Voltage

24kV

Rated Continuous Current

630A

Rated Frequency

50/60Hz

Short Time Withstand Current

20kA/1sec

Mainly Active Load Current

630A

Number of Load-break Operations

30

Short-circuit Making Current (peak)

50kA

Number of Making Operations

5 times

Cable Charging Current

25A

Line Charging Current

Closed Loop Circuit Current

630A

Transformer Magnetizing Current

22A

Wet Condition-10sec Ph- Ph-Eth, Across Interrupters

50kV

DryCondition-1min,Ph- Ph, Phase to Earth

65kV

Dry Condition - 1 min AcrossInterrupter

79kV

Phase to Phase, Phase to Earth

125kV

Across Interrupter

145kV

Internal Arc Test

20kA / 0.1 sec

Arc Extinction Medium

vacuum

Insulation Medium

vacuum

Creepage Distance (Silicon)

960mm

Dry arcing distance

200mm≥

IP Level

6 7

Closing/Opening Time

1sec

Mechanical Operations (Guaranteed)

10000times

Operating Temperature (*Manual Type)

-25~+70℃

As an electric power equipment ltd, we also peovide auto recloserfor sale, anything you need, please contact us.



在线联系供应商

至: Dongguan Wanhang Electronics Technology Co., Ltd
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

33KV SF6 Gas Load Break Switch
33KV SF6 Gas Load Break Switch These load break switch 33kvare intended for outdoor applications. They can be mounted either horizontally or vertically, and are suitable for elec...
15KV SF6 Gas Load Break Switch
15KV SF6 Gas Load Break Switch 15 kv pole mounted disconnect switch is suitable for rated voltage 15kV, rated current 630A, 50/60Hz distribution network breaking. The load curren...
SF6 Gas Load Break Switch 11kv
SF6 Gas Load Break Switch 11kv The 11 kv load break switch is suitable for the distribution network with the highest voltage 11kV, the rated current 630A, and the rated frequency...
SF6 Gas 11KV Load Break Switch
SF6 Gas 11KV Load Break Switch Theload break switch11kvis suitable for the distribution network with the highest voltage 11kV, the rated current 630A, and the rated frequency 50/...
24KV Recloser Vacuum Circuit Breaker
24KV Recloser Vacuum Circuit Breaker 24KV Recloser Vacuum Circuit Breaker The 24KV breaker switch unit is comprised of three poles, the operating mechanism, and the operating mechanis...
供应产品

Same products

Temperature Controller
Temperature Controller 卖方: Tinko Instrument (Suzhou) Co., Ltd. Tinko temperature controller industrialcan improve process efficiency, product quality and minimi...
Sequence Valve Gate Controller
Sequence Valve Gate Controller 卖方: Tinko Instrument (Suzhou) Co., Ltd. Tinko hydraulic valve gate controllerenables control of valve gate flow sequence and timing for p...
TSC-02 Stand Alone Controller
TSC-02 Stand Alone Controller 卖方: Tinko Instrument (Suzhou) Co., Ltd. Tinko TSC-02 integrated dual zone temperature controlleris suitable for small mold. The portable ...
TSC-01 Stand Alone Controller
TSC-01 Stand Alone Controller 卖方: Tinko Instrument (Suzhou) Co., Ltd. Tinko TSC-01 integrated single zone hot runner temperature controller is suitable for small mold....
Touch Screen Hot Runner Controller
Touch Screen Hot Runner Controller 卖方: Tinko Instrument (Suzhou) Co., Ltd. M20 series touch screen hot runner temperature controllers are newly developed with latest achiev...