.

33KV SF6 Gas Load Break Switch

Application of 33kv auto recloser

The 33kvpole mounted switchis made of a proven rugged, corrosion-resistant material (304L stainless steel plate for warships), ensuring a long service life (30 years) and a range of operations, with the characteristics ideal for on-column equipment.

Technical Parameters of load break switch 33kv

Products Type

FWX-36

Basic Ratings

Maximum System Voltage

36kV

Rated Continuous Current

630A

Rated Frequency

50/60Hz

Short Time Withstand Current

16kA/1sec

Making and Breaking Capacity

Mainly Active Load Current

630A

Number of Load-break Operations

400times

Short-circuit Making Current (peak)

40kA

Number of Making Operations

5 times

Cable Charging Current

25A

Line Charging Current

Closed Loop Circuit Current

630A

Transformer Magnetizing Current

22A

Power Frequency Withstand Current Test

Wet Condition-10sec Ph- Ph-Eth, Across Interrupters

70kV

DryCondition-1min,Ph- Ph, Phase to Earth

95kV

Dry Condition - 1 min Across Interrupter

110kV

Impulse Withstand Current Test( 1.2 x 50 µs )

Phase to Phase, Phase to Earth

195kV

Across Interrupter

215kV

Other Ratings & Specifications

Internal Arc Test

20kA / 0.1 sec

Arc Extinction Medium

SF6 Gas

Insulation Medium

SF6 Gas

Creepage Distance (Porcelain)

1055mm

Creepage Distance (Silicon)

1550mm

Dry arcing distance

IP Level

65

Operation Performance

Closing/Opening Time

1sec

Mechanical Operations (Guaranteed)

10000times

Operating Temperature (*Manual Type)

-25~+70℃

Gas Pressure

Nominal Pressure (MPa, at 20°C)

Bursting Pressure (MPa)

  1. ~0.6

Minimum Gas Pressure (MPa)

Leakage Rate (cc/ sec)

≤0.5%

Voltage sensors

CT ABC 10P10 5VA

400:05:00

Incoming side and outgoing side of the voltage sensor

6 Voltage sensor(built-in)

Phase voltage:(24(36)kV/√3)/(3.25V/√3)

Special attention should be paid to the voltage sensor, which must be directly fed by the 33KVload break interrupter switch.

No additional adjustment circuit can be added to the controller. The voltage signal of the 33kv load break switch into the test line needs to be tested separately.

If you want to know more about gopower, please visit our website.



在线联系供应商

至: Dongguan Wanhang Electronics Technology Co., Ltd
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

11KV Auto Recloser Vacuum Circuit Breaker
11KV Auto Recloser Vacuum Circuit Breaker ZW32 series 11 kv breakerare used in distribution systems. 11kv auto reclosers are used to make and break normal and fault currents. 11kv outdoor c...
33KV SF6 Gas Load Break Switch
33KV SF6 Gas Load Break Switch 33KV SF6 Gas Load Break Switch These load break switch 33kv are intended for outdoor applications. They can be mounted either horizontally or verti...
Control Box-Feeder Terminal Unit
Control Box-Feeder Terminal Unit The feeder terminal unit(FTU) is a new HV switch control device of control cabinet enclosures equipped with both the imported DSP high-speed sampli...
Pole Top Switches
Pole Top Switches The pole mounted disconnect switch is a kind of safety switch used on the electric pole to ensure the safety of electricity. Pole top switch's main...
15KV SF6 Gas Load Break Switch
15KV SF6 Gas Load Break Switch FWX1 LBS installed on the pole is suitable for rated voltage 12/24/40.5kV, rated current 630A, 50/60Hz Distribution network breaking. The load curr...
供应产品

Same products

Temperature Controller
Temperature Controller 卖方: Tinko Instrument (Suzhou) Co., Ltd. Tinko temperature controller industrialcan improve process efficiency, product quality and minimi...
Sequence Valve Gate Controller
Sequence Valve Gate Controller 卖方: Tinko Instrument (Suzhou) Co., Ltd. Tinko hydraulic valve gate controllerenables control of valve gate flow sequence and timing for p...
TSC-02 Stand Alone Controller
TSC-02 Stand Alone Controller 卖方: Tinko Instrument (Suzhou) Co., Ltd. Tinko TSC-02 integrated dual zone temperature controlleris suitable for small mold. The portable ...
TSC-01 Stand Alone Controller
TSC-01 Stand Alone Controller 卖方: Tinko Instrument (Suzhou) Co., Ltd. Tinko TSC-01 integrated single zone hot runner temperature controller is suitable for small mold....
Touch Screen Hot Runner Controller
Touch Screen Hot Runner Controller 卖方: Tinko Instrument (Suzhou) Co., Ltd. M20 series touch screen hot runner temperature controllers are newly developed with latest achiev...