.

Diamond Wire Drawing Die Blanks

Industrial diamond powdershas the characteristics of high thermal stability, high chemical stability, good conductivity, good physical properties (high compressive strength, good heat dissipation, strong corrosion resistance, low thermal expansion rate) and so on. It has high hardness and good wear resistance, and can be widely used for cutting, grinding and drilling. Diamond abrasive powderhas high thermal conductivity and good electrical insulation, can be used as a heat sink for semiconductor devices, has excellent light transmission and corrosion resistance, and is widely used in the electronics industry.

What is PCD wire drawing diesused for?

The diamond wire drawing diesblank is made by sintering diamond micropowder under the action of various metals (containing cobalt) catalysts using ultrahigh temperature and ultrahigh-pressure processes. During the sintering process, high-strength diamond bonds are formed between the diamond microcrystalline particles, and the diamond fine powder particles are strongly combined to form polycrystalline diamond (PCD). The diamond wire drawing dieblank manufactured by this method has high wear resistance, hardness and thermal conductivity, but also has good mechanical strength and toughness. It is suitable for drawing copper, aluminum, nickel and other non-ferrous metals, stainless steel and various alloy wire.

E-Grind is a professional PCD diamonddrawing diessupplier and manufacturer, we provide two series of pcd wire drawing die blanks: CDB Series and TDBY Series. 5 grades of grain size available: 3 microns, 5 microns, 10 microns, 25 microns and 50 microns.

E-Grind PCD Wire Drawing Dies Series

CDB Series: self-supported pcd die blanks, for all types of wire drawing, especially where cost is the main concern.

As one of the leading wire drawing dies suppliers, we supply lots of high quality products.

CDBL Series: self-supported Die Blanks (Hexagonal)

Part No.ADDMA No.Dimensions (mm)Max. Die Size(mm)Avg. Grain Size (um)Diagram

DdT35102550

CDBL2510D6-2.510.4○●●●-Diamond Wire Drawing Die Blanks

CDBL3215D12-3.21.51○●●●-

CDBL5225D15-5.22.51.5○●●●-

CDBL5235D18-5.23.52○●●●-

Part No.ADDMA No.Dimensions (mm)Max. Die Size(mm)Avg. Grain Size (um)Diagram

DdT35102550

CDBY2510D6-2.510.4○●●●-Diamond Wire Drawing Die Blanks

CDBY 3215D12-3.21.51○●●●-

CDBY 5225D15-5.22.51.5○●●●-

CDBY 5235D18-5.23.52○●●●-

CDBY 8040D21-843○●●●-

CDBY 9853D24-9.85.34○●●●-

CDBY 13085D27-138.55-●●●○

CDBY160120D30-16127--●●○

CDBY Series: Self-supported Die Blanks (Round)

TDBY Series: tungsten carbide supported die blanks. It is for drawing with high intensity.

Tungsten Carbide supported Die Blanks (Round)

Part No.ADDMA No.Dimensions (mm)Avg. Grain Size (um)Diagram

DdT35102550

TDBY4015D128.1241.5-●●●●Diamond Wire Drawing Die Blanks

TDBY4023D158.1242.3-●●●●

TDBY 4029D188.1242.9-●●●●

TDBY 7040D2113.6574-●●●●

TDBY 7053D2413.6575.3-●●●●

TDBY 12987D2724.1312.98.7-●●●●

TDBY 129120D3024.1312.912--●●●

TDBY150120D3024.131512--●●●

TDBY152120D3124.1315.212●●

TDBY150120D3324.1315.215●●

ADDMA: American Diamond Die Manufactures' Association

D: Total Blank Diameter d: Diamond Diameter

T: Diamond Thickness



在线联系供应商

至: Henan E-Grind Abrasives Co., Ltd.
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Resin Bond Mesh Diamond
Resin Bond Mesh Diamond Each Particle is with sub-crystal structure. Irregular and Very rough surface. New cutting edges come out during working. Also available in electr...
PDC (Polycrystalline Diamond Compact) Cutter
PDC (Polycrystalline Diamond Compact) Cutter Polycrystalline diamond composite(PDC) E-Polycrystalline diamond composite(PDC) sheet is made of diamond particles and cemented carbide matrix sint...
PCD & PCBN
PCD & PCBN E-Grind supplies the whole range of PCD blanks and PCD PCDNfor cutting tool purpose. The largest Diameter of PCD blanks and PCDN blanks available c...
The Influence Factors of the Resin Bond Diamond Tools
The Influence Factors of the Resin Bond Diamond Tools The Influence Factors of the Resin Bond Diamond Tools The influence of binder mainly includes the influence of binder type and content, and so o...
Diamond Wire Drawing Die Blanks
Diamond Wire Drawing Die Blanks The diamond pcd wire drawing die blanksare produced under ultra-high temperature and ultra-high pressure. It consists of diamond powder and metal c...
供应产品

Same products

8×8mm Asscher Cut Blue Diamond Color Moissanite 10K Rose Gold Engagement Ring
8×8mm Asscher Cut Blue Diamond Color Moissanite 10K Rose Gold Engagement Ring 卖方: Guangxi Wuzhou Starsgem Co., Ltd 8×8mm Asscher Cut Blue Diamond Color Moissanite10K Rose Gold Engagement Ring Product Descr...
Starsgem 1ct D VVS2 Oval Brilliant Cut IGI HPHT Lab diamond
Starsgem 1ct D VVS2 Oval Brilliant Cut IGI HPHT Lab diamond 卖方: Guangxi Wuzhou Starsgem Co., Ltd Starsgem 1ct D VVS2 Oval Brilliant Cut IGI HPHT Lab diamond Product Description Material:HPHT L...
Wafer Back Grinding Wheel
Wafer Back Grinding Wheel 卖方: Henan E-Grind Abrasives Co., Ltd. E-Grind Back-Grinding wheels have developed the technology to combine diamond and bond to meet yo...
Vitrified Bond Grinding Wheels
Vitrified Bond Grinding Wheels 卖方: Henan E-Grind Abrasives Co., Ltd. The diamond and CBN are held in place by ceramic components that are fused to form the abrasive p...
Metal Bond Diamond Grinding Wheels
Metal Bond Diamond Grinding Wheels 卖方: Henan E-Grind Abrasives Co., Ltd. The metal bond diamond wheelis made from the sintering of alloy powders and other fillers with ei...