PU/PUT 2-Jaw / 3-Jaw Slant-Column Pull Back Draw Down Power Hollow Chuck
(1). PU/PUT hollow slant-column pull back chuck is suitable for machining the workpiece with the requirement of positioning, verticality and parallelism of the end surface. It only needs to change the clamps when different workpieces are installed.
(2). When processing different workpieces, only need to change the soft jaws to use.
(3).Centrifugal force compensation.
(4). Less maintenance, lower wear, long-term stable accuracy, constant clamping force.
(5). Repeat positioning accuracy up to: 0.025mm.
(6). Chuck diameter range: 110-381 mm, 4 to 15 inch
(7). Material: Steel.
(8). Clamp and pull back the workpiece, with a strong clamping force.
Other supplier products
|
|
BL/BLT 2-Jaw / 3-Jaw Long Stroke Hollow Hydraulic Power Chuck |
(1). BL / BLT hollow hydraulic chuck with 6 inch, 8 inch, 10 inch, 12 inch size and divided into 2- jaw type, 3-jaw type, . (2). Clamping force is ... |
|
|
KV-A 3-Jaw Large Clamping Range Vertical Lathe Hydraulic Power Chuck |
(1). KV-A large vertical lathe chuck has 15 inch, 18 inch, 21 inch,24 inch,28 inch,32 inch size specifications to choose . (2). For the processing ... |
|
|
NHRD 45 degrees/90 degrees Automatic Quartered Centering Hydraulic Indexing Power Chuck |
(1). NHRD chuck NHR chuck based on the expansion of the center positioning workers to ensure that the workpiece when drilling position accuracy. (2... |
|
|
NHRS 45 degrees/90 degrees Automatic Subdivision Quartered Additional Angle Hydraulic Indexing Power Chuck |
(1). NHRS chuck can be 4 x 90 degrees indexing also added 3 degrees, 4 degrees, 5 degrees additional indexing; (2). Parts once clamping, Machinable... |
|
|
BUE 3-Jaw Pull Back Draw Down Power Chuck for I.D.verticality and parallelism |
(1). BUE I.D. pull back chuck apply for machining verticality and parallelism have the required workpieces, such chuck a wide range of clampings. (... |
供应产品
Same products
