moisture management tester
The Moisture Management Tester is the only instrument on the market that can precisely measure the liquid management properties of performance and technical fabrics, ensuring the comfort and protection that consumers demand.
Standards:
AATCC 195，SN 1689.1，GB/T 21655.2
Applications:
The sportswear fabric testing, underwear apparel fabrics testing and research.
Product Information:
Test principle:
The Moisture Management Tester (MMT) is an equipment to measure the dynamic liquid transport properties of textiles such as knitted and woven fabrics in three dimensions:
1. Absorption Rate - Moisture absorbing time of the fabric’s inner and outer surfaces.
2. One-way Transportation Capability – Liquid moisture one-way transfer from fabric’s inner surface to outer surface.
3. Spreading/Drying Rate – Speed of liquid moisture spreading on fabric’s inner and outer surfaces.
MMT consists of upper and lower concentric moisture sensors. The specimen is held flat under fixed pressure between the sensors while standard test solution is introduced on to the top surface of the fabric. Electrical resistance changes between the upper and lower sensors are then recorded dynamically on computer.
MMT permits the measurement of the following indexes:
- Wetting Time Top/Bottom (WTT/WTB)
- Absorption Rate Top/Bottom (TAR/BAR)
- Maximum Wetted Radius Top/Bottom (MWRT/MWRB)
- Spreading Speed Top/Bottom (TSS/BSS)
- Accumulative One-Way Transport Capacity (R)
- Overall Moisture Management Capacity (OMMC)
Professional Technology:
A. Shell all-metal structure, external interference signal has good anti-interference ability.
B. Improving the structure of testing sensor, manual to automatic , the upper sensor, driven by a stepper motor built-in pressure testing equipment, to the fixed pressure automatically stop, can automatically return after the test .
C. Improving the structure of the pump water ,pump water uniformly stable, and can adjust pump water flow by software，Water pump can reverse pumping, make the liquid left in the pipe return to storage tank, prevent brine crystallization plugging silicone tube.
Standard configurations:
1. Mainbody
2 .MMT analysis software.
3.Conductivity Meter
在线联系供应商
Other supplier products
 |
Stone hammer blow testing instrument | Stone hammer blow testing instrument mainly simulates the actual driving condition of the vehicle, and the individual parts of the vehicle body are... |
 |
Bally Type Flexometer | Bally Type Flexometer 6-12-24 Working Places Standards: EN ISO 20344:6.6, I.U.P.10+20, I.U.P.20, UNI 4818, DIN 53.351, UNE/I.U.P.20 Applicatio... |
 |
Electrostatic Attenuation Testing machine | Static Honest Meter is a measuring instrument for attenuation of static electricity, most appropriate for investigating the diffusibility of static... |
 |
Fabric Hand Touch Feel Tester softness value Test | Brief Introduction： By softness value of the test material and objective evaluation of its feeling (touch) performance for softness test fabrics, t... |
 |
wyzenbeek oscillatory abrasion tester | StandardASTM D4157：Standard Test Method for Wear Resistance of Textiles (Swing Roller Method) Applications Oscillator Abrasion Tester is also nam... |
