.

Paper Dirtiness Tester

Introduction:

Paper dust meter is suitable for measuring the dust degree of paper or cardboard, books, toilet paper, tissue paper, etc.

The dust degree tester is lightweight in structure, convenient in experiment and equipped with different contrast pictures, and is widely used in major papermaking enterprises, quality inspection centers, press and publication centers and other units.

Standard:

GB/T1541-2007 Paper and board dust determination

Test principle:

On each square meter of paper or cardboard, the dust degree is expressed by the number of dust with a certain area or by the equivalent area of dust on each square meter of paper or cardboard.

Advantages:

Measures Key Visual Quality Defect: Quantifies the amount of dust/dirt on paper and board surfaces, a direct indicator of visual quality.

Versatile Application: Suitable for testing various paper and board grades and products.

Standard Compliant: Designed to meet relevant national standards for paper and board dust determination.

Easy to Use: Lightweight structure and convenient design facilitate straightforward operation.

Provides Quantitative or Comparative Assessment: Enables assessment based on counting particles or comparing to standard charts, allowing for objective evaluation.

Used Across the Industry: Widely adopted in papermaking, printing, and quality inspection sectors.

Features:

Based on the provided information and typical paper dust testers operating on a visual comparison principle:

Illuminated viewing area with a specific irradiation Angle (60°) to highlight dust particles on the paper surface.

Table with an effective area of 0.0625 square meters for placing the paper or board sample.

The table can be rotated 360° for easy positioning and viewing of the sample.

Standard dust picture with ranges (0.05 - 5.0 mm²) to define different particle size categories for counting or comparison.

Standard dust comparison diagram with ranges (0.04 - 5.0 mm²) for visual comparison of dust particle sizes.

Light source (20W fluorescent lamp) to provide controlled illumination of the test area.

Lightweight structure for convenient handling and portability.

May include a counting grid or magnifier to aid in particle assessment.

Parameters:

Irradiation Angle: 60°

Table: Effective area of 0.0625 square meters, can be rotated 360°

Standard dust picture: 0.05 —— 5.0(㎜2)

Standard dust comparison diagram: 0.04 —— 5.0(㎜2)

Light source: 20W fluorescent lamp

Power supply: 220V 50Hz

Dimensions: 340mm×360mm×480mm(length × width × height)

Standard configuration:

Main engine, standard dust map, comparison map


在线联系供应商

至: Standard International Group (HK) Limited
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Automotive Wires Low - temperature Winding Tester
Automotive Wires Low - temperature Winding Tester The low - temperature winding tester for automotive wires is used to assess and determine the performance of circular wire cables or circular ins...
Schopper Abrasion Tester
Schopper Abrasion Tester Standards DIN 53863. Part 2: Abrasion test methods for textile fabrics (rotary abrasion test). GME Standard 60345 & GMW Standard 3283: Indust...
Shoe Abrasion Tester
Shoe Abrasion Tester Product Introduction: The whole shoe wear testing machine is used to test the wear resistance of soles and sole pieces. The principle is to press ...
Fully Automatic Stripping Machine for Automotive Wires
Fully Automatic Stripping Machine for Automotive Wires The fully automatic stripping machine for automotive wires complies with the standards of GB/T2951 - 2008 and IEC60811 *General Test Methods for ...
Hexapod Tumbler test machine
Hexapod Tumbler test machine Standard BSEN 1471:1997: Evaluation of Appearance Changes in Floor Coverings ISO 9405:2001: Floor Coverings – Determination of Appearance C...
供应产品

Same products

HDPE高速水冷双壁波纹管生产线
HDPE高速水冷双壁波纹管生产线 卖方: Shandong HUASU Plastic Technology Co.,Ltd. 机头模具采用双流道结构、氮化磨光处理机头,偏壁调整方便快捷,保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构,冷却充分,多点分布真空系统,效率更高,生产速度更快。 双层在线扩口功...
PanEVAP & MVR system
PanEVAP & MVR system 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat...
PanGAP wide gap welded plate heat exchanger
PanGAP wide gap welded plate heat exchanger 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel...
PanBloc welded plate heat exchanger
PanBloc welded plate heat exchanger 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac...
PanBox welded plate heat exchanger
PanBox welded plate heat exchanger 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated...