Paper Dirtiness Tester
Introduction:
Paper dust meter is suitable for measuring the dust degree of paper or cardboard, books, toilet paper, tissue paper, etc.
The dust degree tester is lightweight in structure, convenient in experiment and equipped with different contrast pictures, and is widely used in major papermaking enterprises, quality inspection centers, press and publication centers and other units.
Standard:
GB/T1541-2007 Paper and board dust determination
Test principle:
On each square meter of paper or cardboard, the dust degree is expressed by the number of dust with a certain area or by the equivalent area of dust on each square meter of paper or cardboard.
Advantages:
Measures Key Visual Quality Defect: Quantifies the amount of dust/dirt on paper and board surfaces, a direct indicator of visual quality.
Versatile Application: Suitable for testing various paper and board grades and products.
Standard Compliant: Designed to meet relevant national standards for paper and board dust determination.
Easy to Use: Lightweight structure and convenient design facilitate straightforward operation.
Provides Quantitative or Comparative Assessment: Enables assessment based on counting particles or comparing to standard charts, allowing for objective evaluation.
Used Across the Industry: Widely adopted in papermaking, printing, and quality inspection sectors.
Features:
Based on the provided information and typical paper dust testers operating on a visual comparison principle:
Illuminated viewing area with a specific irradiation Angle (60°) to highlight dust particles on the paper surface.
Table with an effective area of 0.0625 square meters for placing the paper or board sample.
The table can be rotated 360° for easy positioning and viewing of the sample.
Standard dust picture with ranges (0.05 - 5.0 mm²) to define different particle size categories for counting or comparison.
Standard dust comparison diagram with ranges (0.04 - 5.0 mm²) for visual comparison of dust particle sizes.
Light source (20W fluorescent lamp) to provide controlled illumination of the test area.
Lightweight structure for convenient handling and portability.
May include a counting grid or magnifier to aid in particle assessment.
Parameters:
Irradiation Angle: 60°
Table: Effective area of 0.0625 square meters, can be rotated 360°
Standard dust picture: 0.05 —— 5.0(㎜2)
Standard dust comparison diagram: 0.04 —— 5.0(㎜2)
Light source: 20W fluorescent lamp
Power supply: 220V 50Hz
Dimensions: 340mm×360mm×480mm(length × width × height)
Standard configuration:
Main engine, standard dust map, comparison map
Send product request
Other supplier products
 |
Gravel Resistant Impact Tester | Standards ASTM D3170: Coating resistance to gravel impingement. ISO 20567: Paints and varnishes – Resistance to stone chipping. SAE J400... |
 |
Water Vapour Permeability Tester | Information The device is a constant temperature and humidity moisture permeability test device, which is suitable for sportswear and other requ... |
 |
Leather edge oil fatigue testing machine | Product Introduction: Leather edge oil is made of polyvinyl chloride and other resins, used to coat leather, recycled leather, artificial/a colore... |
 |
Automatic dry cleaning tester | Instrument Purpose The YG-6 Fully Automatic Dry Cleaning Tester is used to evaluate the physical properties of wool, fur, cotton-linen, worsted, a... |
 |
Transmission belt flammability and flame diffusion characteristics tester | Product Introduction: The conveyor belt flammability and flame diffusion tester is suitable for testing the flammability and flame propagation cha... |
Same products
 |
Resistance Loop Bands | Seller: Shanghai Pisces Sporting & Leisure Products Co., Ltd | Resistance Loop Bandsare versatile fitness tools designed to enhance muscle strength, flexibility... |
 |
Stainless Steel Flux Cored Welding Wire E308T1-1 E308HT1-1 E308LT1-1 Gas Shielded FCAW Wire for 304 Stainless Steel Welding | Seller: 863048 | Product Description stainless steel flux cored wire E308T1-1 E308HT1-1 E308LT1-1,FCAW stainless ... |
 |
E317LT1-1 Flux Cored Wire CO2 Stainless Steel 70% Flux Content 1.0/1.2/1.6mm Diameter OEM Customized 1200C Melting Point | Seller: 863048 | XUNZHUO STAINLESS STEEL CORED WELDING WIRE E317LT1-1 CLASSIFICATION: There are ones with diamet... |
 |
Mini Jewelry Laser Repair System – 60W to 400W Precision Welding | Seller: Beijing JCZ Technology Co., Ltd | The Mini Jewelry Laser Welding Machineis an advanced mini laser welding system engineered for pre... |
 |
Portable Backpack Laser Cleaning Machine – Lightweight, Efficient Rust & Paint Removal | Seller: Beijing JCZ Technology Co., Ltd | TheHCP-M SeriesBackpack Laser Cleaning Machinefeatures a compact pulsed fiber laser system, desig... |
