Shoe Peeling Strength Tester
Product Introduction:
Upper peeling strength tester is suitable for testing the peeling strength between the sole and the upper of the shoe, the principle is to load the shoe on the shoe last clamp on the machine, peel the sole and the upper joint with the peeling knife, measure the force required when stripping force is the peeling force, and then calculate the peeling strength according to the peeling force and the width of the knife edge.
Reference Standard:
GB/T 15107-2013. GB/T 3903.3-2011. BS 20344. QB/T 4329-2012. QB/T 1002-2015.6.5 and other standards
Product Advantages:
Measures Key Bond Strength: Quantifies the adhesion strength between the sole and upper, a vital indicator of shoe durability.
Standard Compliant: Designed to meet numerous national and international standards for whole shoe peel strength testing.
Quantitative Result: Provides an objective numerical value (peeling force and calculated peeling strength) for the bond quality.
Controllable Test Parameters: Allows for precise control of the peeling speed, ensuring consistent test conditions.
Accurate Measurement: Utilizes a force sensor to accurately measure the peeling force.
Suitable for Finished Shoes: Designed to test complete shoes, simulating real-world stress on the sole-to-upper bond.
Adjustable for Different Shoe Sizes: Features adjustable components to accommodate a range of shoe sizes and shapes.
Product Features:
Based on the provided parameters and the whole shoe peel test principle:
Shoe last clamp or universal fixture system designed to securely hold a shoe in position during the test.
Peeling knife with specific, interchangeable widths (20 ± 0.2mm and 10 ± 0.1mm) used to initiate and control the separation of the sole from the upper.
Electric motor and control system for controlled downward movement of the peeling knife edge at an adjustable speed (20 ± 2 mm/min, with adjustable rise and fall speeds).
Force sensor or load cell integrated into the mechanism to measure the peeling force required to separate the sole from the upper.
System to calculate the peeling strength based on the measured force and the specified knife width.
Adjustable positioning rod and tie rod spacing (50-70mm adjustable) to accommodate different shoe sizes and sole configurations.
Dial gauge with a specified range (0.001-10mm) and accuracy (0.001) likely used to measure the progress of the peel or displacement.
Average lifting range (40mm) specifying the distance the peeling action can occur.
Electric operation powered by AC220V.
Robust construction suitable for testing finished footwear.
Technical Parameters:
1. Peeling force: 1000N
2. Peeling knife width: 20±0.2mm and 10±0.1mm
3. Peeling knife edge down speed: 20±2mm/min, rise and fall speed is adjustable
4. Positioning rod and tie rod spacing: 50——70mm adjustable
5. Dial gauge: 0.001—— 10mm, accuracy: 0.001
6. The average lifting range: 40mm
7. Volume (approx.) : 560×320×750mm
8. Power supply: 1∮， AC220V, 50HZ
9. Weight (approx.) : 45kg
在线联系供应商
Other supplier products
 |
Automobile Headrest Strength Tester-QINSUN | Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test methods" : This standard specifies the static streng... |
 |
Cable extrusion tester | Applicable Standards The tester adheres to international standards for cable mechanical testing, including: ISO 6722-1(Road vehicles – Elec... |
 |
Parts Valves Tube Cleaning | A robot system to clean parts, valves and tubes. By high pressure water tools together the intelligent programming, the system can make the clean ... |
 |
Torque Rheometers | Product Introduction Torque rheometer is the ideal device to study the flow and deformation, plasticization, thermal shear stability, dynamic rheo... |
 |
Fabric horizontal burning tester | Standard QB/T 2729: Leather – Horizontal flammability test for physical and mechanical properties. ASTM D5132: Horizontal burning rate of... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
