Footwear Cold Insulation Tester
Product Introduction
Shoes cold resistance testing machine is used to test finished shoes, rubber, sole, synthetic leather, plastic and other test requirements under various low temperature environment to understand the ability of various materials or finished shoes to adapt to low temperature climate or cold terrain area, this instrument is made of rust SUS steel, can be installed with a variety of different test fixtures. In order to meet the different standards of various tests.
Standards
ASTM D17900. EN ISO 20344. HG/T 2411. HG/T 2871. DIN 53351. SATR TM55. Adidas GE-24. GE-57. GB/T 20991-2007 and other standards
Product Advantages
Controlled Low-Temperature Environment: Provides a stable and precise cold environment for conditioning and testing.
Versatile Material Testing: Suitable for testing a wide range of footwear materials and finished shoes.
Standard Compliant: Designed to meet numerous national, international, and industry-specific standards for cold resistance testing.
Accommodates Various Tests: Can be equipped with different fixtures to perform various low-temperature tests (e.g., cold flex, cold impact, thermal insulation).
Wide Temperature Range: Capable of reaching very low temperatures, covering a broad range of cold climate conditions.
Accurate Temperature Control: Features balanced temperature control with high accuracy, uniformity, and minimal fluctuation.
Durable Construction: Made from rust-resistant stainless steel.
Includes Thermal Test Fixture: Equipped with components for conducting low-temperature thermal tests.
Main Parameters
1. Balanced temperature regulator humidity control system
2. Temperature range: -25℃ —— +150℃
3. Temperature fluctuation: ≤±0.5℃
4. Temperature uniformity: ≤2℃
5. Temperature accuracy: ±0.2℃
6. Heating time: +25℃→+85℃ room temperature to 85℃ about 30 minutes no load
7. Cooling time: +25℃→-40℃ room temperature to -40℃ about 50 minutes no load
8. Lead hole: φ50mm 1 (with 1 rubber plug)
9. Heating rate: 3 —— 5℃/min(average)， cooling rate: 0.7 —— 1℃/min(average)
Shoe Thermal Test Fixture Set
A: Cold medium: composed of 5mm diameter and 4kg total mass of stainless steel balls
B: Test copper plate: (350±5)*(150±1)*(5±0.1)mm
C: thermometer: accuracy is ±0.5 ° C
The fixture group should be configured according to actual test requirements or other standard requirements.
在线联系供应商
Other supplier products
 |
Shoe bending Angle tester | Product Introduction: Shoe bending Angle testing machine is mainly used for outsole rigidity test, with a solid block the front of the shoe clampe... |
 |
Wyzenbeek or Oscillatory Abrasion Tester | Product introduction: Wyzenbeek wear resistance tester, also known as Oscillatory wear resistance tester, is used to test the wear resistance of f... |
 |
Drapery Flammability Tester | I. Product Overview TheDrapery Flammability Testeris a specialized instrument designed to evaluate the flame resistance of textiles and drapery ma... |
 |
Geosynthetic Clogging Tester | Scope of application: The method of gradient ratio is used to measure the permeability coefficient and permeability ratio of soil and geotextile s... |
 |
SUGA SX75 7.5kW Super Xenon Weather Meter | SX75 accelerates the degradation of materials by exposing them to simulated outdoor and indoor environments such as sunlight,temperature,humidity... |
Same products
 |
Common Rail Injector Valve F00R J02 012 | 卖方: 868983 | Common Rail Injector Valve F00R J02 012 David Chen |
 |
Common Rail Injector Valve F00R J02 005 | 卖方: 868983 | Common Rail Injector Valve F00R J02 005 David Chen |
 |
Common Rail Injector Valve F00R J01 945 | 卖方: 868983 | Common Rail Injector Valve F00R J01 945 David Chen |
 |
Common Rail Injector Valve F00R J01 941 | 卖方: 868983 | Common Rail Injector Valve F00R J01 941 David Chen |
 |
Common Rail Injector Valve F00R J01 924 | 卖方: 868983 | Common Rail Injector Valve F00R J01 924 David Chen |
