Footwear Cold Insulation Tester
Product Introduction
Shoes cold resistance testing machine is used to test finished shoes, rubber, sole, synthetic leather, plastic and other test requirements under various low temperature environment to understand the ability of various materials or finished shoes to adapt to low temperature climate or cold terrain area, this instrument is made of rust SUS steel, can be installed with a variety of different test fixtures. In order to meet the different standards of various tests.
Standards
ASTM D17900. EN ISO 20344. HG/T 2411. HG/T 2871. DIN 53351. SATR TM55. Adidas GE-24. GE-57. GB/T 20991-2007 and other standards
Product Advantages
Controlled Low-Temperature Environment: Provides a stable and precise cold environment for conditioning and testing.
Versatile Material Testing: Suitable for testing a wide range of footwear materials and finished shoes.
Standard Compliant: Designed to meet numerous national, international, and industry-specific standards for cold resistance testing.
Accommodates Various Tests: Can be equipped with different fixtures to perform various low-temperature tests (e.g., cold flex, cold impact, thermal insulation).
Wide Temperature Range: Capable of reaching very low temperatures, covering a broad range of cold climate conditions.
Accurate Temperature Control: Features balanced temperature control with high accuracy, uniformity, and minimal fluctuation.
Durable Construction: Made from rust-resistant stainless steel.
Includes Thermal Test Fixture: Equipped with components for conducting low-temperature thermal tests.
Main Parameters
1. Balanced temperature regulator humidity control system
2. Temperature range: -25℃ —— +150℃
3. Temperature fluctuation: ≤±0.5℃
4. Temperature uniformity: ≤2℃
5. Temperature accuracy: ±0.2℃
6. Heating time: +25℃→+85℃ room temperature to 85℃ about 30 minutes no load
7. Cooling time: +25℃→-40℃ room temperature to -40℃ about 50 minutes no load
8. Lead hole: φ50mm 1 (with 1 rubber plug)
9. Heating rate: 3 —— 5℃/min(average)， cooling rate: 0.7 —— 1℃/min(average)
Shoe Thermal Test Fixture Set
A: Cold medium: composed of 5mm diameter and 4kg total mass of stainless steel balls
B: Test copper plate: (350±5)*(150±1)*(5±0.1)mm
C: thermometer: accuracy is ±0.5 ° C
The fixture group should be configured according to actual test requirements or other standard requirements.
Send product request
Other supplier products
 |
Automotive Wires Ozone Aging Chamber | Standards ISO 6722: Road vehicles – Electrical cables – Dimensions and test methods. SAE J1128: Low-voltage cables for automotive... |
 |
Automotive Wires Low - temperature Impact Tester | Test standard: ISO 6722. ISO 14572. ISO 19642. SAEJ 1128. QC/T 730. JASOD611-2009 Technical parameters: 1) Low temperature impact height: 50-2... |
 |
Electronic geosynthetics comprehensive strength machine | Meet the standard GB/T16491-2022.GB/T15788-2017.GB/ T13763-2010. ASTM D4632M-a15.GB/ T2191. FZ/T01010. CJ/T452-2014. GB18173.1-2012 and JC/T2112.... |
 |
High-Power Lamp tube （1500W~12000W) | Applicable Standards High-power lamp tubes adhere to global safety and performance benchmarks, including: IEC 60598-1(Luminaires – Genera... |
 |
Automotive Wires Ozone Aging Chamber | Standards ISO 6722: Road vehicles – Electrical cables – Dimensions and test methods. SAE J1128: Low-voltage cables for automotive... |
Same products
 |
Air Intake Filter Test System | Seller: Standard Groups | The Air Intake Filter Test System is designed for testing industrial air filters and engine air f... |
 |
Mattress Spring Fatigue Tester，ASTM D3574 ，how to test mattress for sagging | Seller: Standard International Group (HK) Limited | The King Size Foam Fatigue Tester is a single-station pneumatic fatigue testing system designed f... |
 |
Mattress Rollator，ASTM F1566 ，Mattress Durability Tester，Mattress Fatigue Tester | Seller: Standard International Group (HK) Limited | The Mattress Rollator is a laboratory durability testing system designed to evaluate the long-ter... |
 |
HD2 Pneumatic Foam Fatigue Tester，ISO 3385，Foam Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory testing machine ... |
 |
VW Heel Abrasion Tester，ISO 4649 ，Heel Performance Testing Machine | Seller: Standard International Group (HK) Limited | The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering materia... |
