Shoelace Abrasion Tester
Standards
SATRA TM93、DIN-4843、QB/T2226、SATRA TM154
Principle
Let shoelace cross the eyelet clamped on the fiber board, make the shoelace and eyelet form into 90 degree, make the fiber board and shoelace form into 45 degree. Then straining reciprocated the shoelace under the standard tension by eyelet. While the shoelace is damaged, stop the testing.
Product Advantages
Measures Key Durability of Lacing System: Evaluates the wear resistance of both shoelaces and eyelets, critical for footwear performance and lifespan.
Standard Compliant: Designed to meet standards like SATRA TM93. ensuring recognized and comparable test results.
Quantitative Result: Provides objective data, typically the number of cycles to failure.
Controllable Test Parameters: Allows for precise setting and control of tension, stroke length, and test speed.
Multiple Testing Stations: Equipped with multiple positions (6) for simultaneous testing, increasing efficiency.
Simulates Realistic Abrasion: The setup and reciprocating motion simulate the rubbing action that occurs during footwear use.
Versatile Application: Suitable for testing various types of shoelaces and eyelets.
Product Features
Multiple test positions or stations (6 positions) for simultaneous testing of multiple shoelace-eyelet pairs.
Mechanism to securely clamp a standard eyelet mounted on a fiberboard.
System to position the shoelace and eyelet at specified angles (90 degrees and 45 degrees).
Tensioning system that applies a standard load to the shoelace using weights (455g ± 5g per position, 6 weights included).
Mechanism to reciprocate the shoelace back and forth through the eyelet with a controlled movable stroke (76 ± 2 mm).
Controllable test speed (100 ± 5 cpm) for the reciprocating motion.
Touch-screen control interface for setting test parameters and monitoring the test.
Integrated digital counter (0-999.999 range) to track the number of abrasion cycles performed.
Designed to utilize standard eyelets (Brass, Inner diameter: 4.5mm) and fiberboard (25$times$25mm, Inner diameter 5.0 ± 0.2mm).
Robust construction suitable for repetitive abrasion testing.
Application
This shoelace abrasion tester is used for shoelace against standard eyelet abrasion testing, or eyelet against standard shoelace abrasion testing. This tester is suitable for all kinds of shoelace and eyelet.
parameters
Position：6 positions
Weights：455g ± 5g , 6pcs
Control method：Touch-screen control, 0~999.999
Standard eyelet：Brass, Inner diameter: 4.5mm
Fiberboard：25×25mm, Inner diameter 5.0 ± 0.2mm
Movable stroke：76 ±2 mm
Test speed：100±5cpm
Power supply：1∮AC 220V 50/60HZ
Dimensions(W×D×H)：57x58x1025px
Weight(approx.)：60 kg(excluding weight)
在线联系供应商
Other supplier products
 |
Vertical Flammability Tester | IntroductionVertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwear, fabrics, other textile materials o... |
 |
DSC Differential Scanning Calorimeter | The Differential Scanning Calorimeter (DSC) measures the heat flow to or from a sample under controlled heating conditions. A small amount of sampl... |
 |
STD2 High pressure dustbin cleaning nozzle,pressure washer cleaning head | STD 2 high pressure cleaner STD 2 high-pressure 2D rotary cleaner is suitable for auto industry, chemical industry and other occasions requiring h... |
 |
Smoke - Emission Testing Machine for Aerospace Wires and Cables | Standards Compliance: In accordance with the provisions of the U.S. military specifications MIL - W5086C and 22759D, as well as "GJB17.17 - 84 T... |
 |
Adhesion Tester | The tack - holding tester, also known as the tack - holding property tester, tack - holding force tester, or holding - power tester, is a device sp... |
