Automatic Cross-hatch Tester
Product Introduction:
It is a general purpose instrument used to perform a variety of different scratch and scratch resistance tests on paint layers and plastic surfaces. For test plates of different thickness, parallel and cross cutting can be performed with single and multi-row cutting knives. In particular, the adhesion test is carried out according to the cross marking method for all user standards, and the scratch resistance test is carried out according to the GME60 280. A wide range of test parameters and a wide selection of test tools make these tests easy to perform.
Meet the standard:
GM 14688(Method A)， GM 14688(Method B)
PV 3952 public standard, GB 9286-2021
Q/SQR S1-16-2016 Chery standard
Q/SQR T1-64 Chery standard, GME 60 280
GB/T 9286-97/IS0 2409IS02409
GB/T 9279-2007/IS0 1518:1992
QCC SY051-2012
Technical parameters:
Control system: PLC
Size of the test piece (relatively small) : 80x50mm
Sample thickness: 0.5-20mm
Marking path: 0-45mm
Operation interface: Simplified Chinese/English
Size of the test piece (relatively large) : 105mm wide, arbitrary length
Standard load range: 2-50N
Dimensions (W x H x D) : 380x480x760mm
Power supply: 115/230VAC, 50/60Hz(please specify voltage when ordering)
Operation interface: Color 7 inch touch screen, English and Chinese switching, no less than two kinds of voice
在线联系供应商
Other supplier products
 |
Chemical Protective Robotic Manikin Clothing Testing Equipment | |
 |
Fogging Tester for Automotive & Textile Materials-QINSUN | Standard DIN 75201(Determination of the Evaporation Behavior of Materials in Motor Vehicles) ISO 6452(Rubber- or Plastics-Coated Fabrics &mdash... |
 |
MMT Liquid Water Separation Tester-QINSUN | |
 |
AATCC Gray Scale for Color Change | Applicable Standards The AATCC Gray Scale aligns with international colorfastness evaluation protocols, including: AATCC Evaluation Procedure... |
 |
AATCC KMS-M6 Washer, KMS-M6D Dryer-QINSUN | Product Overview TheAATCC KMS-M6 Washer & KMS-M6D Dryerare precision textile testing instruments designed to evaluate fabric durability, col... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
