Conical twin screw extrusion platform
Product Introduction:
The conical twin-screw torque rheometer is composed of main control unit and conical twin-screw unit, which can simulate the production process of conical twin-screw extruder in laboratory. The unique structural design makes the cleaning of corrosive materials easier and faster after each experiment. The equipment is especially suitable for the processing of PVC powder, supplemented by different molds, can directly extrude plates, pipes and profiles for experiments.
Standards:
ISO14839-1:2002
ASTMD4703-16
EN1114-1:1996+A1:2008
2006/42/EC
Performance parameters:
1. Host
- Power supply: 3×380V, 50Hz +N +PE, 32A
- Host control mode: industrial bus control
- Drive motor power: 3.0kw
- Gear ratio: 10:1(15:1 optional)
- Power output speed: 5 —— 150 rpm
- Speed control accuracy: 0.3% F.S
- Temperature control: 9 channels are used for temperature measurement, including 4 channels for temperature control
2. Conical twin screw extrusion platform
- Structure: double segment separable
- Screw diameter: 20-39mm
- Effective screw length: 325mm
- Effective length of screw: 340mm
- Double tube: 20-40mm
- Maximum temperature: 350℃
- Static measurement accuracy: 0.1℃
- Temperature control accuracy: ±0.5℃
- Torque measurement range: 0 —— 250Nm
- Tension sensor: INTERFACE
- Torque measurement accuracy: 0.1%F.S
- Melt pressure measurement range: 0.1 —— 100 Mpa
- Melt pressure measurement accuracy: 0.5%F.S
- Temperature sensor: J-type thermocouple
- Heating power/zone: 550W
- Heating zone: Zone 4
- Cooling method: compressed air
- Feeding method: screw metering feeding
- Feeding motor brand: JSCC, reduction ratio 50:1. manual speed regulation
在线联系供应商
Other supplier products
 |
Xenon Test Chamber/weather ometer | Introduction Weather-Ometer and Fade-Ometer tester adopts water-cooled xenon lamp. This instrument using argon arc lamp simulation control ideal n... |
 |
Paper Grammage Tester | Introduction: The circular square quantitative sampler (referred to as quantitative sampler) is a special sampler for the quantitative determinati... |
 |
Leather Seam Fatigue Tester | Standards ISO 5402: Leather physical testing – Flex tester method for adhesion and strength analysis. SATRA TM55: Seam fatigue testing fo... |
 |
ISO 12103-2 M2 Test Dust | Product Introduction: Particle Technology Fuel Contamination Test Dust offers a full range of fuel contamination test materials used to test the... |
 |
Thermal Protective Performance Tester (TPP)-QINSUN | The Thermal Protective Performance (TPP) Test Device was developed to measure the time elapsed for convective and radiant heat to penetrate through... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
