Conical twin screw extrusion platform
Product Introduction:
The conical twin-screw torque rheometer is composed of main control unit and conical twin-screw unit, which can simulate the production process of conical twin-screw extruder in laboratory. The unique structural design makes the cleaning of corrosive materials easier and faster after each experiment. The equipment is especially suitable for the processing of PVC powder, supplemented by different molds, can directly extrude plates, pipes and profiles for experiments.
Standards:
ISO14839-1:2002
ASTMD4703-16
EN1114-1:1996+A1:2008
2006/42/EC
Performance parameters:
1. Host
- Power supply: 3×380V, 50Hz +N +PE, 32A
- Host control mode: industrial bus control
- Drive motor power: 3.0kw
- Gear ratio: 10:1(15:1 optional)
- Power output speed: 5 —— 150 rpm
- Speed control accuracy: 0.3% F.S
- Temperature control: 9 channels are used for temperature measurement, including 4 channels for temperature control
2. Conical twin screw extrusion platform
- Structure: double segment separable
- Screw diameter: 20-39mm
- Effective screw length: 325mm
- Effective length of screw: 340mm
- Double tube: 20-40mm
- Maximum temperature: 350℃
- Static measurement accuracy: 0.1℃
- Temperature control accuracy: ±0.5℃
- Torque measurement range: 0 —— 250Nm
- Tension sensor: INTERFACE
- Torque measurement accuracy: 0.1%F.S
- Melt pressure measurement range: 0.1 —— 100 Mpa
- Melt pressure measurement accuracy: 0.5%F.S
- Temperature sensor: J-type thermocouple
- Heating power/zone: 550W
- Heating zone: Zone 4
- Cooling method: compressed air
- Feeding method: screw metering feeding
- Feeding motor brand: JSCC, reduction ratio 50:1. manual speed regulation
Send product request
Other supplier products
 |
Needle Flame Tester | Standard GB/T 5169.5: Electrical & Electronic Equipment – Needle Flame Test Method IEC 60695-11-5/IEC 60695-2-2: Fire Hazard Testing &n... |
 |
Automotive connector insertion and withdrawal force testing machine | Standards ISO,CE,UL,ASTM,DIN,EN,GB,BS,JIS,ANSI,TAPPI,AATCC,IEC,VDE Main parameters 1. load: 50kg, 20Kg, 10Kg, 5Kg optional 2. minimum resolut... |
 |
Fabric Friction Charge Tester | Fabric frictional voltage electrostatic tester machineis the antistatic fabric and knitted fabric friction generated by the amount of charged charg... |
 |
European standard shrinkage testing machine | Product Overview TheEuropean Standard Washer(EN 14399-compliant) is a high-performance fastening component designed for industrial and automotiv... |
 |
Qinsun Xenotest 220 | Standards ISO 105-B02: Lightfastness testing for colored textiles. AATCC TM16 (Option 3): Accelerated weathering for textiles under controlle... |
Same products
 |
HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line | Seller: Shandong HUASU Plastic Technology Co.,Ltd. | The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi... |
 |
PanEVAP & MVR system | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
