.

Geosynthetic Clogging Tester

Scope of application:

The method of gradient ratio is used to measure the permeability coefficient and permeability ratio of soil and geotextile system and its interface under no-pressure conditions, and the mud content of geotextile is measured to determine whether the geosynthetic material is used as a filter layer of some soil, and whether the blockage is not allowed.

Meet the standard:

ASTM D5101-2006JTG E50 T1145-2006,SL/T , etc

Instrument features:

Suitable for all kinds of soil and geotextile;

Floor type design, stable fuselage structure, not easy to deformation:

Plexiglass test chamber can visually observe the silting process of geotextiles:

The seal of the specimen holding device in the test cylinder is good to ensure the feasibility of the test.

The height of the test cylinder is reasonable, and a certain space is reserved above the soil sample to make the water flow uniform and stable.

Manual rotary hand wheel drive, water level regulation, efficient and smooth:

6 pressure gauges for easy pressure observation and high measurement accuracy:

Easy to install, easy to operate.

Technical parameters:

Instrument type floor type

The inner diameter of the test cylinder is 100mm

The sample height is 100mm

Head difference adjustment range 0——1050mm

Head difference accuracy ±1mm

Support net aperture 6mm

Overall dimensions 450x400x980mm(LxWxH)

Weight 75kg


在线联系供应商

至: Standard International Group (HK) Limited
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Shoe Sole Heat Resistance Tester
Shoe Sole Heat Resistance Tester Reference standard EN ISO 20344. EN ISO 8772-1. GB/T 20991-2007. ANSI, JIS, CSA, GB12017-1989. LD50-1994 and other standards Main uses The sole ...
Seam Fatigue Tester for Textile & Apparel Durability
Seam Fatigue Tester for Textile & Apparel Durability Standard ISO 13935-1/2(Textiles – Seam Fatigue Testing for Woven Fabrics) ASTM D1683(Standard Test Method for Failure in Sewn Seams of Wove...
Heat insulation efficiency limit test furnace
Heat insulation efficiency limit test furnace Product Introduction: Heat insulation efficiency and fire resistance test furnace of steel structure fire retardant coatings is a special instrume...
New warm body dummy tester-QINSUN
New warm body dummy tester-QINSUN Product Description In addition to heat dissipation to the surrounding environment through conduction, convection and radiation, the human body al...
Geosynthetics thickness tester
Geosynthetics thickness tester Scope of application: Used to determine the thickness of various geosynthetic materials under specified pressure and time. The sample is placed on...
供应产品

Same products

Common Rail Injector Valve F00R J02 012
Common Rail Injector Valve F00R J02 012 卖方: 868983 Common Rail Injector Valve F00R J02 012 David Chen
Common Rail Injector Valve F00R J02 005
Common Rail Injector Valve F00R J02 005 卖方: 868983 Common Rail Injector Valve F00R J02 005 David Chen
Common Rail Injector Valve F00R J01 945
Common Rail Injector Valve F00R J01 945 卖方: 868983 Common Rail Injector Valve F00R J01 945 David Chen
Common Rail Injector Valve F00R J01 941
Common Rail Injector Valve F00R J01 941 卖方: 868983 Common Rail Injector Valve F00R J01 941 David Chen
Common Rail Injector Valve F00R J01 924
Common Rail Injector Valve F00R J01 924 卖方: 868983 Common Rail Injector Valve F00R J01 924 David Chen