Automatic folding recovery tester
Instrument Introduction
This instrument detects the recovery property of fabrics by applying specific test methods (BS, ISO, AATCC). It presses fabric samples under certain loading devices for a specified time, then releases them into sample clamps to allow free recovery while recording the recovery angle.
The equipment determines sample recovery performance from horizontal creases through measured wrinkle recovery angles, particularly suitable for wrinkle-prone fabrics like cellulose-based and other woven materials.
Referenced Standards
AATCC 66-2014. GB/T 3819. ISO 2313. GA 573-2009. BS EN 22313. M&S P22
Test Principle
Specimens of defined shape and size are folded and compressed under specified conditions for a set duration. After load removal, the samples undergo specified recovery time before the wrinkle recovery angle is read from a graduated dial, quantifying the fabric's crease recovery capability.
Functional Features
1. Ergonomic load application device for convenient specimen compression
2. Precision sample clamping mechanism ensuring horizontal positioning without bulging or slippage
Technical Specifications
1. Load weight: (500 ± 5) g × 2 units
2. Circular dial: 10°~180° measurement range
3. Sample dimensions: 40×15 mm
4. Tablet dimensions: 18×14 mm
5. Pincer jaw width: 25 mm
6. Net weight: 6 kg
7. Dimensions: 17×17×36 cm (L×W×H)
在线联系供应商
Other supplier products
 |
Safety shoe impact testing machine | According to the criteria: Bs-953,1870 EN-344, ANSI-Z41 CSA-Z195 ISO K88782 EN ISO 20344, ANSI-Z41 BS EN-344 CSA-ZI95 LD50-1994 AS/NZS 2... |
 |
Dry heat shrinkage tester | Meet the standard GB/T9101-5.4-2017.GB/T9102-6.8-2016.GB/T19390-7.4.1-2023.ASTM D4974-2002. etc Scope of application It is used to test the dry ... |
 |
Luminous Afterglow Performance Tester | Luminous Afterglow Performance Tester The luminous afterglow performance tester is suitable for testing the luminous afterglow performance of vari... |
 |
Car seat fatigue tester | Applicable standards: GB/T 18941-2003"Test method of foam polymer materials for car seats" : This standard specifies the test method of foam polym... |
 |
Textile Drying Time Tester |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
