Oil mist separation efficiency test bench
Quality assurance and the development of filters/separators/collectors should ideally be conducted under test conditions relevant to the actual conditions encountered. Therefore, oil separators must be tested at high temperatures up to 120°C and, depending on the application type, at high pressures.
Using the modular test system HMT 1000. oil separators (e.g., for separating leaked aerosols in internal combustion engines or for separating oil mist downstream of compressors) can be characterized quickly and accurately, and successfully tested under real-world conditions via isothermal particle measurements up to 120°C:
• Staged separation efficiency
• Load/holding time
• Total separation efficiency/weight analysis
• Pressure loss
Due to the modular layout, individual components of the test bench, such as the high-resolution heated light scattering spectrometer Promo® 1000 H, the heated dilution system KHG 10 D, and the heated aerosol generator PLG 2100. can be easily removed from the HMT 1000 and used for other applications, such as direct measurements on the engine.
At the heart of the HMT 1000 is the Promo® 1000 H light scattering spectrometer, which is used to simultaneously and independently measure particle size and particle number (and thus concentration). With the Promo® 1000 H, very fast, clear, reproducible, and isothermal measurements are possible.
Standard
GB/T 6165-2021
Technical parameters
| Measurement range (size) | 0.18 – 40 µm |
| Volume flow rate | 1 – 25 Nm3/h, 1 – 85 Nm3/h (Other specifications available upon request) |
| External dimensions | Approximately 1.600•2.000•800 mm (H•W•D) |
| Differential pressure measurement | 0 – 5.000 Pa (ande auf Anfrage) |
| Aerosol concentration | Up to 107 particles/cm3. equipped with 2 KHG 10 D |
| Compressed air supply | 6 – 8 bar |
在线联系供应商
Other supplier products
 |
Flame Spread Calorimeter | The Flame Spread Calorimeter is suitable for: Building materials: Evaluate flame spread and heat release performance of walls, doors, windows, cei... |
 |
Cantilever Fabric Stiffness Tester - lab instrument | Standard ZB WO4003. GB/T18318. ASTM D 1388. IS09073-7. BS EN22313 Application Fabric Stiffness Tester, is a practical equipment to determine the... |
 |
Car seat fatigue tester | 1. Product Overview The Car Seat Fatigue Tester is a precision testing system designed to evaluate the long-term durability and fatigue performanc... |
 |
zipper reciprocating fatigue testing machine | Application The instrument is widely used to evaluate the durability and service life of zippers with various length in the fields of clothing acc... |
 |
Water Vapour Permeability Tester | Application Suitable for testing water vapour permeability of sportswear fabrics, waterproof-breathable textiles, outdoor functional materials, co... |
Same products
 |
Air Intake Filter Test System | 卖方: Standard Groups | The Air Intake Filter Test System is designed for testing industrial air filters and engine air f... |
 |
Mattress Spring Fatigue Tester，ASTM D3574 ，how to test mattress for sagging | 卖方: Standard International Group (HK) Limited | The King Size Foam Fatigue Tester is a single-station pneumatic fatigue testing system designed f... |
 |
Mattress Rollator，ASTM F1566 ，Mattress Durability Tester，Mattress Fatigue Tester | 卖方: Standard International Group (HK) Limited | The Mattress Rollator is a laboratory durability testing system designed to evaluate the long-ter... |
 |
HD2 Pneumatic Foam Fatigue Tester，ISO 3385，Foam Fatigue Testing Machine | 卖方: Standard International Group (HK) Limited | The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory testing machine ... |
 |
VW Heel Abrasion Tester，ISO 4649 ，Heel Performance Testing Machine | 卖方: Standard International Group (HK) Limited | The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering materia... |
