Gas Jet Erosion Rig
Get a quote：
Whats/App: +86 185 0176 3615
Web: qinsun-lab.com
Email: serving@qinsun-lab。com
Standard Performance
The velocity of the particles is determined by the air pressure and length of nozzle. A wide range of velocities is covered from 25 to 80 m/s and a feed rate of 0.2 to 2 g/minute.
Enhanced Performance
By enclosing the particle feed assembly in a small chamber and applying a pressure of up to 4 bar, the particle velocity can be increased from a nominal maximum of 80 m/s to 120 m/s. The pressure differential between the mixing chamber and the nozzle discharge remains approximately 1 bar, indicating a pressure drop of 3 bar between the particle feed chamber and venturi injector.
A definitive investigation of the relationship between the pressure differentials between the feed assembly chamber, the mixing chamber, the injector upstream pressure and the nozzle discharge pressure and the resulting particle flow rate has yet to be completed. However, the addition of the feed chamber, which is now fitted as standard, does produce a measurable increase in particle velocity under certain user adjusted test conditions.
Technical Specifications
| Standard Performance | |
| Velocity: | 25 to 80 m/s at 1.5 bar pressure |
| Feed Rate: | 0.2 to 2 g/minute. |
| Enhanced Performance | |
| Maximum Velocity: | 120 m/s at 4 bar pressure |
| Service Requirements | |
| Clean, dry air: | 1.5 bar and 3.5 c.f.m. flow rate for speeds up to 80 m/s |
| 4 bar and unspecified flow rate for speeds up to 120 m/s | |
| Electricity: | 220/240V, single phase, 50 Hz, 1.5 kW |
| Installation | 1.000 mm wide x 1.200 mm high x 400 mm deep on floor standing frame |
在线联系供应商
Other supplier products
 |
Dry Sand Rubber Wheel Wear Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Dry and wet sand abrasive wear testing machine is mainly used to evaluate the wear... |
 |
High Temperature Dielectric Strength Oil Heated Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com High temperature voltage breakdown tester (oil heating) is mainly suitable for sol... |
 |
Hexapod Tumbler test machine | Testing Equipment | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Standard BSEN 1471:1997: Evaluation of Appearance Changes in Floor Coverings ISO... |
 |
Plastic Friction and Wear Testing Machine | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com This machine complies with the standard GB/T3960-2016: Methods for Testing Sliding... |
 |
Full-Body Garment Stress Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Full-Body Garment Stress Tester is used to evaluate the pressure exerted by variou... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
