Gas Jet Erosion Rig
Standard Performance
The velocity of the particles is determined by the air pressure and length of nozzle. A wide range of velocities is covered from 25 to 80 m/s and a feed rate of 0.2 to 2 g/minute.
Enhanced Performance
By enclosing the particle feed assembly in a small chamber and applying a pressure of up to 4 bar, the particle velocity can be increased from a nominal maximum of 80 m/s to 120 m/s. The pressure differential between the mixing chamber and the nozzle discharge remains approximately 1 bar, indicating a pressure drop of 3 bar between the particle feed chamber and venturi injector.
A definitive investigation of the relationship between the pressure differentials between the feed assembly chamber, the mixing chamber, the injector upstream pressure and the nozzle discharge pressure and the resulting particle flow rate has yet to be completed. However, the addition of the feed chamber, which is now fitted as standard, does produce a measurable increase in particle velocity under certain user adjusted test conditions.
Technical Specifications
| Standard Performance | |
| Velocity: | 25 to 80 m/s at 1.5 bar pressure |
| Feed Rate: | 0.2 to 2 g/minute. |
| Enhanced Performance | |
| Maximum Velocity: | 120 m/s at 4 bar pressure |
| Service Requirements | |
| Clean, dry air: | 1.5 bar and 3.5 c.f.m. flow rate for speeds up to 80 m/s |
| 4 bar and unspecified flow rate for speeds up to 120 m/s | |
| Electricity: | 220/240V, single phase, 50 Hz, 1.5 kW |
| Installation | 1.000 mm wide x 1.200 mm high x 400 mm deep on floor standing frame |
Send product request
Other supplier products
 |
Racing Seat Headrest Restraint and Front-Rear Impact Testing Machine | The Racing Seat Headrest Restraint and Front-Rear Impact Testing Machine is designed to evaluate the strength and impact performance of racing seat... |
 |
Oil Filter Performance Tester - Test Equipment | Applicable standards DIN 71460-1 Road vehicles - Air filters for passenger compartments of motor vehicles - Part 1: particulate matter filtration ... |
 |
Launder-Ometer Washing Fastness Tester | Double-Cylinder Launder-Ometer Testing Standards:ISO 105 C01 C02 C03 C04 C05 C06 C08 D01, BS 1006 C01 C02 C03 C04 C05, AATCC 28 61 86 132 151 19... |
 |
Full Vehicle Sunlight Simulation Test Chamber | Applications Full Vehicle Sunlight Simulation Test Chamber is designed to evaluate the aging performance of complete assemblies or entire vehicles... |
 |
MMT Liquid Water Separation Tester | Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developing hydrophobic coatings for medical textiles Qual... |
Same products
 |
Air Intake Filter Test System | Seller: Standard Groups | The Air Intake Filter Test System is designed for testing industrial air filters and engine air f... |
 |
Mattress Spring Fatigue Tester，ASTM D3574 ，how to test mattress for sagging | Seller: Standard International Group (HK) Limited | The King Size Foam Fatigue Tester is a single-station pneumatic fatigue testing system designed f... |
 |
Mattress Rollator，ASTM F1566 ，Mattress Durability Tester，Mattress Fatigue Tester | Seller: Standard International Group (HK) Limited | The Mattress Rollator is a laboratory durability testing system designed to evaluate the long-ter... |
 |
HD2 Pneumatic Foam Fatigue Tester，ISO 3385，Foam Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory testing machine ... |
 |
VW Heel Abrasion Tester，ISO 4649 ，Heel Performance Testing Machine | Seller: Standard International Group (HK) Limited | The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering materia... |
