General Ventilation Test Bench

According to the ISO16890-2016 standard, the test bench is mainly used for the testing of general ventilation air filters. Based on the performance results determined in the test procedures, the filters are classified (particulate matter ePM). In the air filter test, two types of artificial aerosols, oily and saline aerosols, are used to measure the comprehensive efficiency within the particle size range of 0.3μm to 10um. Coarse aerosol (artificial test dust) is used to obtain the test dust holding capacity and weighing efficiency.

Meet the standards

ISO16890-2016

Advantage

All key instruments are of imported brands, ensuring accurate data during testing.

2. The installation fixture adopts pneumatic sealing, which is convenient and fast.

3. The test pipeline adopts a rotating structure, making the installation of the filter more convenient.

4. The pipeline design uses fluid analysis for airflow simulation, and the designed structure is more in line with the testing standards.

Technical parameters

Flow range	600-5400m³/h
Measurement error	Plus or minus 2% or less
Resistance range	0-500pa
Accuracy of the measuring device	0-70 Pa≤± 2Pa, > 70Pa≤±3%
Aerosol homogeneity	+ 15% or less
Initial efficiency repeatability	< 40% plus or minus 30% or less
Error in particle concentration indication	40%-60% ≤±15%
	60%-80% ≤±8%
	80%-90% ≤±4%
	90%-99% ≤±2%
Efficiency range	ePM1 ≤99%(Comprehensive efficiency)
Power consumption of the entire machine	18KW
Main pipeline	Square :610x610mm, material :304 stainless steel
Land area	13000x2500x2500(mm)(length x width x height)
Filtration efficiency	1. Filter resistance
	2. DEHS Counting Efficiency (PM1
	3. KCL counting efficiency (PM2.5. PM10)
	4. Weighing efficiency
Filtration resistance	Flow-resistance curve
Dust holding capacity	Final life test of the filter
Counter	PALAS, Promo2000. sampling flow rate :5L/min±5%

Other supplier products

	Safety Shoes Compression Puncture Resistant Tester	Test Standards ISO 20344 ANSI Z41 LD50.A EN12568;ANSI;JIS;CSA; Specification Sensor capacity 20KN Load resolution 1/20000 Accu...
	Gas pulse testing machine	The Gas Pulse Testing Machine is suitable for a variety of automotive testing applications: Turbocharger Components: Test air intake pipes, interc...
	Transparent Absorbing Wave Temperature and Humidity Vibration Test Chamber	Applications The Transparent Absorbing Wave Temperature and Humidity Vibration Test Chamber is a high-end testing device capable of simulating com...
	Leather Freezing Flexing Tester - Test Equipment	Applicable Standards The tester adheres to international standards for material testing at low temperatures, including: ISO 4674-2(Rubber- or pla...
	Oil Filter Performance Tester	The Oil Filter Performance Tester evaluates the durability, efficiency, and fatigue resistance of hydraulic and lubrication filters under repeated ...

供应产品

Same products

	Air Intake Filter Test System	卖方: Standard Groups	The Air Intake Filter Test System is designed for testing industrial air filters and engine air f...
	Mattress Spring Fatigue Tester，ASTM D3574 ，how to test mattress for sagging	卖方: Standard International Group (HK) Limited	The King Size Foam Fatigue Tester is a single-station pneumatic fatigue testing system designed f...
	Mattress Rollator，ASTM F1566 ，Mattress Durability Tester，Mattress Fatigue Tester	卖方: Standard International Group (HK) Limited	The Mattress Rollator is a laboratory durability testing system designed to evaluate the long-ter...
	HD2 Pneumatic Foam Fatigue Tester，ISO 3385，Foam Fatigue Testing Machine	卖方: Standard International Group (HK) Limited	The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory testing machine ...
	VW Heel Abrasion Tester，ISO 4649 ，Heel Performance Testing Machine	卖方: Standard International Group (HK) Limited	The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering materia...